UNSOLVED

Lee Gillie

updated

21 years ago

LG

Lee Gillie

10 Posts

0

8186

May 5th, 2006 12:00

How to print 3x5 cards on 5100cn

Can it even be done? If so, how do you configure the MPF for it? I'd like to print landscape design.
  • grcooperjr

    174 Posts

    1164

    0

    Posted May 5th, 2006 14:00

    I dont have any card stock to try, but i think this is the way to do it.

    Set up driver to feed from the MPF under the paper tray  tab

    Set up the driver under the paper tab to a custom size 1 thru 20. makes no difference what you pick (max size of stock is 210 x 297 mm)

    under the paper tab, go into margin shift and set the the size of the stock in inches or mm's

    Make sure that the driver is set to landscape or portrait as desired

    The MPF should by default be set to Free size.

    Load the card stock into tray as shown on the tray (portrait not landscape here)

     

    That should do it. You may have to play with the zoom level in the driver to get it to fill as needed. Let us know if it works

     

    Ray Cooper

    Message Edited by grcooperjr on 05-05-200608:18 AM

    Message Edited by grcooperjr on 05-05-200608:21 AM

  • SkariMari

    96 Posts

    1164

    0

    Posted May 9th, 2006 10:00

    Just one more thing... You'll probably need to set the paper type to 'Covers 1' (or 2) on the printer operator panel for it to feed properly.
  • Lee Gillie

    10 Posts

    1164

    0

    Posted May 9th, 2006 12:00

    I must be dense, but I couldn't see what values needed to be entered. I also went into MS PRINTERS and created a FORM that was 3x5. This shows up as a CUSTOM SIZE now. Can be selected as paper size, but not output size???? Anyway, after running about 3 dozen cards through the printer trying various options, they all printed blank. So I gave up and got some 8.5x11 cardstock, printed as labels, and then got the paper cutter out.