How do I print MSDOS jobs to a networked 3110cn printer
Our networked (Dell) computers cannot print MSDOS print jobs to our new networked (Dell) 3110cn printer. Typically, these old programs can only print to LPT1, LPT2, or LPT3. It should be possible to use some command like
net use LPT3: \\\ /persistence:yes
but that does not work.
For normal Windows XP pro printing, everything works fine.
Anybody know how to do this please?
PS: Dell tech support says this is above and beyond a warranty Question.. :)
To get the printer name, right-click on that printer and select properties. Now select ports; Scroll down the list (assumig you have lots of printers) and also expand the port column so that you can read the full printer name.
Thanks..
I found the screen you directed me to. See: http://www.gpsinformation.info/joe/dellprinter1.png
When I input the command line:
net use lpt3 \\3110cn Printer/persistent:yes
or
net use lpt3 \\\3110cn Printer/persistent:yes
or
net use lpt3 \\192.168.168.51\3110cn Printer/persistent:yes
(where 192.168.168.51 is the IP address of the network printer)
In all cases, I get the error message:
System Error 66 has occurred.
The network resource type is not correct.
What shall I try next?
Thanks to all for your suggestions! I think we are in the right ball park but the Dell 3110cn printer when plugged directly into the LAN must have some unusual syntax.. And there is nothing about this in the manual.
What you have done is created a standard tcp/ip port to link that printer. This won't work in DOS with the commands given in MS kb.
You need to add a printer so that it shows something like
\\RadioMain\HP4P (your HP4P printer on RadioMain). This is a printer connected to server/PC called RadioMain or something similar. I suggest install a new printer using:
Start, Printer & Faxes, Add Printer
Now select "A Network Printer or Printer attached to another Computer" and follow the instructions on the screen.
When the printer s attached, Print a Test Page in Windows to see it is working. Then right-click on that printer icon to go to properties page and to get the server name. What we are trying to get is a name similar to
\\RadioMain\3110cn.
When I try to add a printer, the printer wizard find no more printers on the network to add. (The Networked 3110cn is already installed and working fine except on DOS calls.)
It appears to me that the structure \\server name\printername is not applicable in this (networked) configuration. ??? What IS the server name for a printer with its own network card and which is not connected to a host computer? I can find no references on the internet to this configuration.
This is what worked for me with a 1600n on our network:
1. Right click on the printer icon in control panel, and select 'Sharing..'
2. Share the printer, giving it a name like 'My3110' for example
3. In a DOS box, type 'Net use lpt3: \\My3110 /persistent:y'
4. The just print to lpt3:
5. This should work - I know it isn't how we think sharing is supposed to work, but it does, even though the printer is not connected locally.
I'm afraid that I'm not in the office where I set this up, and I'm writing this from memory. Let me know if it doesn't work, and I'll check exactly the syntax I used - I should be there later on this evening (UK time)
jtanna
33 Posts
311
0
Posted November 11th, 2006 16:00