UNSOLVED

maineiac13

updated

13 years ago

M

maineiac13

32 Posts

0

15376

January 31st, 2012 15:00

Dell ships new printer when all I need is a Drivers and Utilities disk!!

Whatever Dell may have been in the past, it is certainly not nimble or efficient today.

I recently purchased a 1350cnw printer and was looking up how to set it up for wireless.  Essentially, the online manual indicated to insert the drivers and utilities disk and follow the "wizard" which would guide me through the process.  Easy I thought.  So I inserted the disk and could not find anything about installing the printer as a wireless printer.  Then I looked closer and realized that instead of sending me the Drivers and Utilities Disk for the 1350cnw, Dell had mistakenly included the disk for the 1250c.  So I thought, okay, I'll just call and have Dell send me the correct disk.  Not so easy as it turns out.

After telling the CSR what I wanted I was placed on hold for about 10 minutes.  Finally she came back on line and said that the only way I could get the disk is if Dell shipped me a new printer, then I was to take out the disk and return the printer to them.  She said that the disk did not have an inventory number so there was no way they could just ship me the disk as they could not specifically tell the shipping department what to ship to me.  Instead, they are going to ship me a new printer.

Now when the new printer gets returned, before it is ever shipped to someone else I assume that it will be checked out and someone will magically be able to find a disk to put in it to replace the one that I have retained....If only Dell could get that someone now to do this, slap the disk in  an envelope and put a 45c stamp on it.  Wonder how much Dell is going to pay to ship the printer to me, ship it back to them, check out the printer to make sure I didn't do anything bad to it and of course find another disk to put in the box for the next time it is shipped to someone?

Go figure!!

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    699

    0

    Posted February 1st, 2012 06:00

    My apologies. They were correct in that we do not have part numbers for the printer CDs. The manufacturer actually assembles the parts in the box and adds the CD. Then they ship the box.


    DELL-Chris M (old account)

    #IWork4Dell

  • maineiac13

    32 Posts

    699

    0

    Posted February 3rd, 2012 05:00

    But this was actually a refurbished printer so presumably it was put together by Dell people. So obviously someone at the Dell refurbished department must have access to these CDs.

  • maineiac13

    32 Posts

    699

    0

    Posted February 3rd, 2012 05:00

    I forgot to mention that I got a follow-up call indicating that they could not send me the printer since indeed the one I have is a refurbished printer.  Instead they were going to send me the software via email...which would be fine.  Then I got another call saying they could not do that either.  (I should have suggested that they contact the refurbished department to see if there was a disk there, but forgot to ask that question.)

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    699

    0

    Posted February 3rd, 2012 11:00

    But this was actually a refurbished printer so presumably it was put together by Dell people.
    * Yes. But I doubt they would know to look for a CD.

    I forgot to mention that I got a follow-up call indicating that they could not send me the printer since indeed the one I have is a refurbished printer.  Instead they were going to send me the software via email...which would be fine.  Then I got another call saying they could not do that either.  (I should have suggested that they contact the refurbished department to see if there was a disk there, but forgot to ask that question.)
    * I cannot speak to why they cannot download the driver and email it to you. This might be what your need. The driver itself is here.


    DELL-Chris M (old account)

    #IWork4Dell

  • maineiac13

    32 Posts

    699

    0

    Posted February 3rd, 2012 16:00

    But this was actually a refurbished printer so presumably it was put together by Dell people.

    * Yes. But I doubt they would know to look for a CD.

    **But presumably someone must have fouind a CD to put in myi box....they just put the wrong one in.

    * I cannot speak to why they cannot download the driver and email it to you. This might be what your need. The driver itself is here.

    **Thanks...I already downloaded what could be found at that site...not actually what I need.  

    Part of the problem here is that I assumed (obviously incorrectly) that this would be a no-brainer issue.  Just pop a cd in the mail to me and be done with it.  I started this issue with a "chat" on Saturday.   The chat began after I indicated the exact printer I was using and thus assumed that when I was connected to chat that I would be getting someone in the laser printer department.  Nope...not to be,  In fact I was told that laser printer chat did not exist.  Then I was told they would connectt me via chat to the laser printer chat people...but instead I was disconnected.  Then I came back to chat with another person and was told again that laser chat did not exist and was given a phone number to call.

    This particular printer is located at my apartment in NYC, which is not my primary residence.  And on Sunday I was returning back to Maine so I figured all I needed to do would be to call the number when I returned to Maine and have the disk sent to me.   On Tuesday I called and of course entered all the information indicating my printer and its service code, etc.....and I told the person what I wanted.  After a time, I was finally told sorry, I was not in the laser printer department so I was transferred to the laser printer dept....where what I indicated in the first post occurred.

    Hopefully, when I get back to NYC I can accomplish this myself by bringing an ethernet cable, setting it up via the wired internet connection and then I should be able to look for the printer with windows and set up the wireless connection.  (What I don't want to do is have a long phone conversation in NYC as the only phone I have there costs me 25c per minute to use...even with 800 numbers.)

  • keithrc1

    2 Posts

    699

    0

    Posted February 17th, 2014 09:00

    Hi Chris,

    I'm also looking for this setup and utility software, and the link you provided above seems to have aged out.  Can you repost a working link to this setup disk for the 1350cnw?  It appears to not be on the drivers and downloads page- if it is, please tell me which package it is, and how to make it run the wireless setup wizard.

    Thanks!