Can't install network printer driver from 64 bit Vista to 32 bit vista on
wireless network.
Hi,
I recently installed Windows Vista 64 bit Ultimate on my Dell 600 XPS. The printer is connected to this machine. I have a Dell Inspiron 1720 with Vista Ultimate 32 bit. connected to my home network wireless. I can't get the printer driver to install to my laptop. It worked ok when both machines were 32 bit. Is i possiable to connect to this printer with this set up? and if so could someone explaine it to me. It's driving me crazy. Thanks for any info.
I usually recomment that the person disconnects the printer. Un-installs the printer, then restarts the computer. Did you try using the ESP 5 Drivers from Kodak website? It didn't state if they were Vista 32-bit or 64-bit drivers. I cannot locate much information on this printer.
Thanks for the info. I'll try disconnecting the printer and unistalling the software. I have the software that came with the printer. I also downloaded the software from the Kodak web site. On the site you olny have 2 options for this printer, software download and firmware download. The printer is usb connected to 64 bit os and works just as its supposed to. When i try to connect to the printer on the network from my laptop, i get the error message can't install driver check the spelling of the name of the printer is spelled correctly. Thanks again for the help. I'll let you know how i make out.
I had a similar problem myself. In order to fix the problem. I had to use the printers install disk in both machines. Following the step by step instructions & doing it twice was a pain, but with the wireless functionality for my laptop it had me connect the USB cable while it configured the settings for me. Hope this helps some.
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
504
0
Posted February 24th, 2009 17:00
pachevyman,
Make and model of printer would be very helpful.
Rick