One of our brand new 5100's (< 1 month) has been acting up. After printing something normally to one of the paper trays, it later prints that same job to the MPF the next time that someone sends an MPF print job. The reverse also happens -- an MPF print job is printed a second time using paper from one of the regular trays. This is not intermittent, except that only the most recently printed "tray job" re-prints at the MPF.
The trays and the MPF are all set to "Plain 1" paper type and the MPF is set to "Free Size" for the paper size. We're using only the ethernet interface.
This printer is geographically in another location, so I haven't seen the problem firsthand. However, we have an identical 5100cn here that is configured the same (I think), but I haven't been able to reproduce this error. Is this a printer setup/driver thing on the client (I don't see any obvious differences between our office and the remote office printer setups)? The workstations utilizing the remote printer are Win98 and are using the PCL driver that was installed from the CD.
Printer and driver are both set to Copy=1. Note, too, that the duplicates are coming out _not_ from the same paper source -- if they print using the tray with letter-size paper, the second copy comes out from the MPF, and vice versa.
I'm going to reinstall their drivers and check their Windows patch levels...
I reinstalled the printer on those remote workstations using original Dell CD and the problem seems to have gone away. I'm guessing that the printer install was done differently (and consistently differently) the first time around.
d3sp
470 Posts
484
0
Posted November 23rd, 2004 12:00