I have had the Dell 3110cn printer for months and have printed over 1,300 copies. When I use my browser and talk to the printer through: http://10.0.0.12/ews/index.htm The Printer Status always shows the Cartridge Levels at 100% on all cartridges. The printer LCD display also indicates full toner. The browser window does seem to communicate with the printer as the "Print Volume" shows the correct information. I want to make sure I do not run out of toner and ant new cartridges on hand but do not want to buy them until I am close to running out of toner. I have rebooted the printer and computer and reloaded the printer software. I select the Refresh button on the browser window.
Your toner usage/page coverage could be very light(E.g only printing text most of the time)..in this case, you are using far less than the average page volume.
See the marketing disclaimer message, typical print volume is based on 5% for each color..if you are printing out alternate CMYK text line for whole Letter size page, you are using around 3-5% of toner.
I have used mostly text, but probably have used at least 100 pages of photos. I would think I would get at least a 5% drop in toner. Dell sent me a new Printer and using the older toner cartridges in the new printer the problem still is there. This is really strange. Thanks for trying to help.
I finally solved the problem. Unfortunately Dell help line people do not know how there product works. They sent me on may wild goose chases, and actual sent me another printer. The 2nd printer had another defect, so it needed repair also. All in all a real pain. It turns out after I printed enough pages, the toner level on my black toner cartridge dropped to 80%. The Dell 3110CN printer has toner resolution of 20%. So if your toner level is over 80% full, it reads 100%. The display on the printer LCD and the web page you can directly view on your computer calling up the IP address of the printer read the same. So as toner is depleted you will get readings of 80% then 60%, then, 40% and so on. Hope no one else has this problem.
Unfortunately Dell spent a lot of money on this problem, because there technicians do not know about the toner meter having 20% steps. They sent me a new printer at their expense. The new printer had a bad Fuser, so they sent me a new Fuser, again at their expense. I shipped everything back to them at their expense and they now have a used printer that cannot be sold at a retail price.
ThunderGod
56 Posts
544
0
Posted May 29th, 2007 01:00