UNSOLVED

sherb25

updated

3 years ago

Closed

S

sherb25

1 Rookie

•

7 Posts

0

554

July 16th, 2023 11:00

Storage Pool Degraded - MD3660f

I have a MD3660f device which has an extension attached with a single storage array on that.  We have 2 disk pools, one on the extention and one on the main array.  The one on the main array is currently showing as degraded.  This seems to have happened because we had a failed disk.  I have replace the disk as usual, and its been detected and added as an assigned disk.  However, the writeback process never seems to have started, and the disk pool still shows as degraded.  Any suggestions on how to fix this issue as I'm concerned losing additional disks might cause data loss.  

  • DellEMCSupport

    1 Rookie

    •

    631 Posts

    179

    0

    Posted July 16th, 2023 19:00

    Hello thanks for choosing Dell. Would you be able to post a pic of the screen?

    MDSM (Modular Disk Storage Manager) 

  • sherb25

    1 Rookie

    •

    7 Posts

    178

    0

    Posted July 16th, 2023 21:00

    sherb25_0-1689569051619.png

    Hi, wasn't sure which screen you wanted so I've posted a couple.  

    sherb25_1-1689569168288.png

    As you can see, all of the physical disks look ok ATM. 

  • DellEMCSupport

    1 Rookie

    •

    631 Posts

    171

    0

    Posted July 16th, 2023 22:00

    Hello if you click on the highlighted in red, you will see what kind of problem you are facing. 

    1 Attachment

  • sherb25

    1 Rookie

    •

    7 Posts

    169

    0

    Posted July 16th, 2023 22:00

    Hi, yes I have checked the recovery guru as highlighted, and all it mentions are: 

    Thin Virtual Disk Repository - Full

    Thin Virtual Disk Repository - Threshold Exceeded 

    Replication Group Synchronization - Threshold Exceeded 

    Virtual Disk not on preferred path 

     

    None of these issues would seem to relate to the problems we are experiencing.  

     

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    143

    0

    Posted July 17th, 2023 02:00

    Hi @sherb25,

     

    It seems that the disk now is optimal, and recovery guru is not showing any failed drive to be rebuild. The degraded VD might be related to VD not on preferred path. Can you check in recovery guru for preferred path recovery and follow the instructions. 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • sherb25

    1 Rookie

    •

    7 Posts

    142

    0

    Posted July 17th, 2023 02:00

    Hi Joey, 

    Thanks for the help.  I've just had a look, and there are only 6 virtual disks showing as being on the wrong path in that diskpool, but we have way more than that showing as degraded.  Also, one of the disks showing as wrong path is not degraded, so I don't think thats the issue.  

    Its also got 7 disks in the other pool as on the wrong path, but none of them are degraded.  

     

  • DELL-Erman O

    Moderator

    •

    2984 Posts

    •

    14874 Points

    135

    0

    Posted July 17th, 2023 03:00

    Hi, might be the degraded disk pool is that one or more of the physical disks are failing but not yet marked as failed. You can try to check the health status of each disk by using the physical disk properties option in the MDSM. You can also run a disk consistency check to verify the integrity of the data on the disks.

    DELL-Erman O

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • sherb25

    1 Rookie

    •

    7 Posts

    131

    0

    Posted July 17th, 2023 04:00

    Hi, 

    I can't see how to check the physical disk properties in MDSM.  Is it just a case of selecting each disk individually?  

    The disk consistency check for the disk pool is greyed out on the menu.  

  • sherb25

    1 Rookie

    •

    7 Posts

    30

    0

    Posted July 17th, 2023 06:00

    Oh, also you can usually see the writeback process as an operation while its running, and this doesn't seem to be the case with this.  

     

  • DELL-Erman O

    Moderator

    •

    2984 Posts

    •

    14874 Points

    117

    0

    Posted July 17th, 2023 06:00

    yes you can selecting each disk individually and check them. I assume the replaced HDD was Dell part. Please check the replaced HDD's firmware version if needed you can update it. Just maybe come to my mind writeback process can take some time depending on amount of data in the cache and speed of HDDs. 

    DELL-Erman O

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!