SpinalTap

updated

17 years ago

S

SpinalTap

19 Posts

0

6099

July 14th, 2009 08:00

Monitoring MD3000 with ITA

Hello all,

We use IT Assistant to monitor the health of our servers -- works fine for us.  We have a new MD3000 which will be connected to one server.  I'd like snmp traps from the array to pass though this server to the ITA management station.  So far, ITA will not discover the new array hanging off of the server.  Is "in band" managment possible here, or will I have to put the MD3000 directly on the network in order to monitor/manage it?

Thanks in advance for any insight.

  • dzenz

    175 Posts

    452

    1

    Posted July 14th, 2009 20:00

    The MD3000 Ethernet management ports must be connected to a network that is reachable from the management station that IT Assistant is being run on.

    The net is that ITA can only "see" a MD3000 via out-of band management (i.e. the Ethernet management ports).

    Dave

     

  • SpinalTap

    19 Posts

    452

    0

    Posted July 15th, 2009 08:00

    Thanks for the reply Dave.  I called our tech rep just before I saw your post, and he told me the same thing.

    Would've been nice to have a sentence to that effect in the documentation!