If there is no choice to bring the storage out from production and being offline awhile to replace all drive and reconfigure, then replacing 1 by 1 drive would be the best option. But this process may take a very long duration to finish replacing all 12 drives with 1.2TB as you need to wait for each rebuild to finish before proceeding to the next replacement. Sometimes, you may encounter RAID puncture, ref: https://dell.to/3Y8wmto
My thoughts would be to do a data backup, reconstruct with all drives replaced then copy data back in.
DELL-Joey C
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did.
Hi, I think this is AL14SEB18EQ the model number, the one you gave. We need to check DPN(part number). I googled that model number and found this GP3FR part number. It seems the below attributes if the same HDD you have. And This HDD seems compatible with MD3400, I can recommend checking DPN on HDD.
GP3FR
HD,1.8T,SAS,10K,2.5,T-14SE
POWERVAULT
MD3400 TRIBES SAS12
Regards,
DELL-Erman O
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
2. My array is 3.5" and I need those 2.5" to 3.5" adapters, could you share the part number? This is what I found: Y004G 3.5 to 2.5 Tray Adapter -- is it right?
From what I am seeing the only listed 2.5 to 3.5 adapter on the MD3400 would be part number 9W8C4. I am not seeing Y004G listed for anything other than poweredges.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Joey C
Moderator
•
4170 Posts
•
20965 Points
152
0
Posted February 26th, 2023 21:00
Hi @I-AM-PAT,
If there is no choice to bring the storage out from production and being offline awhile to replace all drive and reconfigure, then replacing 1 by 1 drive would be the best option. But this process may take a very long duration to finish replacing all 12 drives with 1.2TB as you need to wait for each rebuild to finish before proceeding to the next replacement. Sometimes, you may encounter RAID puncture, ref: https://dell.to/3Y8wmto
My thoughts would be to do a data backup, reconstruct with all drives replaced then copy data back in.
DELL-Joey C
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did.