UNSOLVED

alarec

updated

22 years ago

A

alarec

1 Message

0

8503

July 22nd, 2003 18:00

Calculating Tape Vault needs

Hi  Everyone,

 

     I need to find out if there is a formula to figure out storage needs. I just started at a firm that has had 300% growth this year and we are running out of space on tapes and harddrives. I have to figure out which Dell tape vault we want to purchase and install to consolidate the backups on our 10 servers and also how much space I need to handle future growth. Any imput is appreciated. Thanks.

  • 521

    0

    Posted July 10th, 2004 22:00

    Just installed an EMC/Dell CX400 with a DAE2 and DPE which amounts to 2Tb of disk.

    To back it up I installed a 2 Gb Fibre Channel switch (they are EMC/Dell brocades) PowerVault 136T with 6 LTO-2 drives and Qinetix CommVault.

    This bad boy manages to back up around 1Tb of data ranging from SQL and Exchange databases to file servers with millions of documents in less than 6 hours.

    Prior to this I was taking in excess of 20 hours to back up the same data to a 130T with 4 40/80Gb DLT's and BE 8.6.

    If you have fast storage growth and see it going into the 100's of Gb's or Tb's over the next 2-3 years you must buy LTO-2 drives because at the moment they are only thing which will back up that amount of data in a reasonable time.

    Good Luck

  • daddyroo2k

    10 Posts

    521

    0

    Posted August 12th, 2004 22:00

    LTO3 is on the roadmap for the PV136T. It will do 400/800, but unfortunately you will have to wait until the end of the year to get you jhand on this

    s u c k e r for the PV136T.

     

    Also, if you have a PV136T LTO1 library, you are able to upgrade this to LTO2. Just call Dell support fdor instructions.

     

    Cheers

  • 521

    0

    Posted August 13th, 2004 07:00

    Nice!!!

    Can you tell me where I can get some info on LTO3 in the 136T???

    Cheers

  • Stopokingme

    1 Message

    521

    0

    Posted May 16th, 2005 20:00

    As far as the 136T supporting LTO3, I havnt found anything either, however the 136T is an ADIC Scalar 100.  Dell sells LTO3 drives for that model and as this is simply a rebranded device, they likely will either work outright, or be coming with one shortly.  Either way, there may be some way to get this to happen.  Next time Im going straight to ADIC I think though - they dont play these compatibility games.