UNSOLVED

zy1997

updated

3 months ago

Z

zy1997

1 Message

0

28418

May 26th, 2003 09:00

Who can help me!!!!! a question of 6650!

a 6650 with win2000server. when I copy some files to another Server of Pc , the Server hanged. and report a "CPU IERR" and "E07F0" .but when I copy files from other,it`s ok. I have change the cpu_board,and PERC card.and the rise card .
  • 440

    0

    Posted May 30th, 2003 17:00

    How many CPU's do you have?

    If more than one, pull a CPU and VRM to narrow down to a single processor or processor slot.

  • oc2tm

    4 Posts

    440

    0

    Posted July 1st, 2003 12:00

    Hi,

    i have the same problem with a 6650 ( 2x 2,0 XEON CPU,s )

    System Hang

    Embedded System Management Log contains...

    Severity : Unknown
    Date & Time : Mon Jun 30 16:39:42 2003
    Description : CPU IERR processor sensor state asserted

    Message Edited by oc2tm on 07-01-2003 03:23 PM

  • DELL-Mark A

    2 Intern

    •

    2521 Posts

    440

    0

    Posted July 1st, 2003 15:00

    Hi,

    The latest System Upgrades have resolved this issue in most cases:

    System BIOS, PowerEdge 6650, A12
    FileName:  PE6650-BIOSA12.EXE [553 KB]
    Release Date:  6/30/2003
    http://support.dell.com/FileLib/Format.aspx?ReleaseID=R62633

    ESM Firmware, PowerEdge 6650, A25
    FileName:  PE6650-ESMA25.exe [225 KB]
    Release Date:  4/3/2003
    http://support.dell.com/FileLib/Format.aspx?ReleaseID=R57233

  • oc2tm

    4 Posts

    440

    0

    Posted July 2nd, 2003 13:00

    Hi,

    i have apply the BIOS, hope it works :)
  • oc2tm

    4 Posts

    440

    0

    Posted July 3rd, 2003 15:00

    With the New Bios i have the same problems, now are the Dell Support change the CPU,s , VRM,s and the CPU Baseboard ;(
  • Selke

    19 Posts

    440

    0

    Posted September 20th, 2003 00:00

    I, too, am having a similar issue.

    I was wondering if anyone else has had issues with the Dell PE6650 and an annoying CPU IERR E07F0 on reboot.  I have seen other the other threads where Dell has replaced the MotherBoard and has suggested upgrading the BIOS and ESM to the latest revision.  However, that has not seemed to help anyone.

    Has anyone seen this?  Has anyone fixed it?  I have a server that's in a test invironment now, but there's no way I can put it into production with this type of behavior.


    Thanks in advance...

  • Selke

    19 Posts

    440

    0

    Posted September 20th, 2003 01:00

    This may actually help...

    http://premiersupport.dell.com/us/en/kb/document.asp?nav=Knowledge_Base&DN=HO1072332&SvcTag

     

    I am using the latest BIOS, ESM, and Dell OpenManage as of 9/19/03.

    Very odd...

     

  • JuanLUX

    1 Message

    440

    0

    Posted October 16th, 2003 13:00

    Sorry for the crazy keyboard ;-D

    Same problem with three different 6650

    1st   4 X Xeon + 8GB

    2nd  2 X Xeon + 2GB

    3rd  2 X Xeon +  4G

    Any suggestions?

    Message Edited by JuanLUX on 10-16-2003 04:07 PM

  • oc2tm

    4 Posts

    440

    0

    Posted October 16th, 2003 13:00

    Hi, our 2 6650,s have this Problem since 12 Weeks, Dell is changing now the Memory Riser Board, before was changed the CPU,s , VRM,s , Mainboard, PCI Board and CPU Board ... never ending story :P
  • aqualls1

    2 Posts

    165

    0

    Posted February 24th, 2004 20:00

    My 2 cents, I have had the same error, some times I also got a pci bus error I do not remember the exact error, but the system always locks up hard when it happens.  They have replaced every part in the system twice; I finally fixed it by turning it off.  Does anyone have another solution?