
UNSOLVED
Numerous error messages by Server Administrator
Hello,
I have numerous error messages that are logged by Open Manage Server Administrator on my Linux system. The errors range from:
* Chassis intrusion
* Processor sensor value unknown
* Power supply sensor failure
* Temperature sensor detected a failure
* Voltage sensor detected a failure
* Fan sensor detected a failure
I have the following configuration:
Server: Dell PowerEdge 800
OS: CentOS v4.1
Kernel: 2.6.9-11.ELsmp
SW: Server Administrator v2.1 (OpenManage v4.4)
I have read the description of the errors (URL: http://support.dell.com/support/edocs/software/svradmin/2.1/en/index.htm), but they seem too many errors in a short period of time. I'll include a snapshot of the errors below.
Is it possible to have this many failures, or am I simply running an unsupported kernel?
Any help is appreciated. Thanks!
--Hussam
The error messages were preceded by "Server Administrator: Instrumentation Service"
EventID: 1054 Temperature sensor detected a failure value Sensor location: BMC Planar Temp Chassis location: Main System Chassis Previous state was: OK (Normal) Temperature sensor value (in Degrees Celsius): -128.0
EventID: 1104 Fan sensor detected a failure value Sensor location: BMC Back Fan Chassis location: Main System Chassis Previous state was: OK (Normal) Fan sensor value (in RPM): 0
EventID: 1151 Voltage sensor value unknown Sensor location: BMC 1.5V PG Chassis location: Main System Chassis Previous state was: OK (Normal) Discrete voltage state: Unknown
EventID: 1151 Voltage sensor value unknown Sensor location: BMC 1.8V PG Chassis location: Main System Chassis Previous state was: OK (Normal) Discrete voltage state: Unknown
EventID: 1151 Voltage sensor value unknown Sensor location: BMC PROC VTT Chassis location: Main System Chassis Previous state was: OK (Normal) Discrete voltage state: Unknown
EventID: 1151 Voltage sensor value unknown Sensor location: PROC VCORE Chassis location: Main System Chassis Previous state was: OK (Normal) Discrete voltage state: Unknown
EventID: 1154 Voltage sensor detected a failure value Sensor location: BMC CMOS Battery Chassis location: Main System Chassis Previous state was: OK (Normal) Voltage sensor value (in Volts): 0.000
EventID: 1254 Chassis intrusion detected Sensor location: Intrusion Chassis location: Main System Chassis Previous state was: OK (Normal) Chassis intrusion state: Open
EventID: 1351 Power supply sensor value unknown Sensor location: PROC VRM Chassis location: Main System Chassis Previous state was: OK (Normal) Power Supply type: VRM Power supply input AC is off Power supply switch is off Power supply POK signal is not normal Power supply is turned off
EventID: 1352 Power supply returned to normal Sensor location: PROC VRM Chassis location: Main System Chassis Previous state was: Unknown Power Supply type: VRM Power Supply state: Presence detected
EventID: 1354 Power supply detected a failure Sensor location: PROC VRM Chassis location: Main System Chassis Previous state was: OK (Normal) Power Supply type: VRM Power Supply state: Presence detected, Failure detected, Predictive failure, AC lost, AC lost or out of range, AC present but out of range
EventID: 1601 Processor sensor value unknown Sensor location: PROC Chassis location: Main System Chassis Previous state was: OK (Normal)
I have numerous error messages that are logged by Open Manage Server Administrator on my Linux system. The errors range from:
* Chassis intrusion
* Processor sensor value unknown
* Power supply sensor failure
* Temperature sensor detected a failure
* Voltage sensor detected a failure
* Fan sensor detected a failure
I have the following configuration:
Server: Dell PowerEdge 800
OS: CentOS v4.1
Kernel: 2.6.9-11.ELsmp
SW: Server Administrator v2.1 (OpenManage v4.4)
I have read the description of the errors (URL: http://support.dell.com/support/edocs/software/svradmin/2.1/en/index.htm), but they seem too many errors in a short period of time. I'll include a snapshot of the errors below.
Is it possible to have this many failures, or am I simply running an unsupported kernel?
Any help is appreciated. Thanks!
--Hussam
The error messages were preceded by "Server Administrator: Instrumentation Service"
EventID: 1054 Temperature sensor detected a failure value Sensor location: BMC Planar Temp Chassis location: Main System Chassis Previous state was: OK (Normal) Temperature sensor value (in Degrees Celsius): -128.0
EventID: 1104 Fan sensor detected a failure value Sensor location: BMC Back Fan Chassis location: Main System Chassis Previous state was: OK (Normal) Fan sensor value (in RPM): 0
EventID: 1151 Voltage sensor value unknown Sensor location: BMC 1.5V PG Chassis location: Main System Chassis Previous state was: OK (Normal) Discrete voltage state: Unknown
EventID: 1151 Voltage sensor value unknown Sensor location: BMC 1.8V PG Chassis location: Main System Chassis Previous state was: OK (Normal) Discrete voltage state: Unknown
EventID: 1151 Voltage sensor value unknown Sensor location: BMC PROC VTT Chassis location: Main System Chassis Previous state was: OK (Normal) Discrete voltage state: Unknown
EventID: 1151 Voltage sensor value unknown Sensor location: PROC VCORE Chassis location: Main System Chassis Previous state was: OK (Normal) Discrete voltage state: Unknown
EventID: 1154 Voltage sensor detected a failure value Sensor location: BMC CMOS Battery Chassis location: Main System Chassis Previous state was: OK (Normal) Voltage sensor value (in Volts): 0.000
EventID: 1254 Chassis intrusion detected Sensor location: Intrusion Chassis location: Main System Chassis Previous state was: OK (Normal) Chassis intrusion state: Open
EventID: 1351 Power supply sensor value unknown Sensor location: PROC VRM Chassis location: Main System Chassis Previous state was: OK (Normal) Power Supply type: VRM Power supply input AC is off Power supply switch is off Power supply POK signal is not normal Power supply is turned off
EventID: 1352 Power supply returned to normal Sensor location: PROC VRM Chassis location: Main System Chassis Previous state was: Unknown Power Supply type: VRM Power Supply state: Presence detected
EventID: 1354 Power supply detected a failure Sensor location: PROC VRM Chassis location: Main System Chassis Previous state was: OK (Normal) Power Supply type: VRM Power Supply state: Presence detected, Failure detected, Predictive failure, AC lost, AC lost or out of range, AC present but out of range
EventID: 1601 Processor sensor value unknown Sensor location: PROC Chassis location: Main System Chassis Previous state was: OK (Normal)
Responses (0)
Solutions (0)
