Setup and Configuring PowerEdge R520 Servers with Power Vault MD3220
Hello, I was wondering if anyone could supply me with the Dell configuration guide for configuring an PowerVault MD3220 series with Dell R520 Server hosts??
Server and MD details :
2 R520 Servers : SAS 6Gbps HBA External Controller
PowerVault MD3220 : 6G SAS single 2G cache controller with 6Gb MIni to mini SAS cable,1M
We are going to use vmware vsphere essential plus on inbuilt SD card. do we need to configure it ? Could someone help me out with any documents or helpful videos.
There's really not much to configure since the MD3220 is running as a DAS.
Update the firmware on the MD3220 and the RAID controller first, along with any BIOS updates for R520. Configure the array within the RAID controller BIOS, then run the full initialization on the array to ensure the disks are OK. Depending on the amount of drives in there it could take a whole day if not more.
MD1400 is supported on Dell 13th and 14th generation of servers, hence it is not validated on R520. It may work. As it is not validated we can not guarantee that it will work on R520. Below link have details on controller supported on MD1400.
Hydralisk00222
2 Intern
•
2440 Posts
1221
0
Posted April 1st, 2014 20:00
There's really not much to configure since the MD3220 is running as a DAS.
Update the firmware on the MD3220 and the RAID controller first, along with any BIOS updates for R520. Configure the array within the RAID controller BIOS, then run the full initialization on the array to ensure the disks are OK. Depending on the amount of drives in there it could take a whole day if not more.