UNSOLVED

wsucoug

updated

15 years ago

W

wsucoug

3 Posts

0

20284

February 1st, 2006 10:00

400SC will not boot with IDE drive as my primary boot drive and a SATA drive as the slave (storage)?

I've got a Dell 400SC with A09 bios. I have a 40gb IDE drive that I use as the primary boot drive.  I just purchased and installed a 250gb SATA drive.  When I try to boot I get the "NTLDR is missing" message.  If I disconnect the SATA drive, the system will boot up.

It seems the 400SC system defaults to booting from the SATA drive if one is installed. 
 
I can get the system to load by selecting the boot menu (F12) and then pick Primary IDE drive. However, I can't automate this process. So I'm looking for the answer to one of two questions:
 
1) How can I get the machine to boot from the SATA drive directly?
2) How can I force the IDE drive to boot even if an SATA drive is installed?
 
Any assistance is appreciated.
 
 
  • Arathir

    1 Message

    529

    0

    Posted February 14th, 2006 22:00

    I would like to know this as well. I just bought a SATA drive for extra space and it will try to boot from the SATA drive every time. I would have thought that there would be an option in the BIOS for that. Unless I am missing it, I don't see it at all. Is there an option to choose which drive to boot from?
  • hemerich

    83 Posts

    529

    0

    Posted February 20th, 2006 13:00

    Though I am not familiar with your particular machine, usually in the BIOS you can set the boot order. Ususally press F2 during the POST and go into the BIOS, choose Boot Order (or something to that effect-verbiage is different on every BIOS), and using the keyboard move the IDE disk up the order.
  • ecomajor

    3 Posts

    529

    0

    Posted June 9th, 2006 16:00

    I have similar issues, although I user bios A10. And I would like to get the SATA drive to be my boot drive and I am having issues with that.
  • DaveIA

    1 Rookie

    •

    9 Posts

    529

    0

    Posted January 22nd, 2012 12:00

    Same here!  The boot sequence options in BIOS revision A10 only list: 3.5" diskette, CDROM or IDE.

    Can we get another revision that allows the PE 400SC to boot from a SATA drive?

    Or is there another way that already exists?  If yes, how?

    Thanks in advance!

       D.

  • theflash1932

    11 Legend

    •

    16255 Posts

    529

    0

    Posted January 22nd, 2012 13:00

    The 400SC (the whole SC lineup actually) is obsolete and will not receive any more updates.  If it indeed cannot boot to a SATA device (even after enabling, if possible in integrated devices and boot order - which sounds odd that you wouldn't be able to), then it will never be able to.  There are machines much nicer and newer than the 400SC that have also already stopped receiving updates.  

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    529

    0

    Posted January 23rd, 2012 08:00

    If you want to use an IDE harddrive for a bootdisk, get an IDE-to-SATA converter and connect it to a SATA port on this system.

    I did that on my 400SC back when I still used it as my primary desktop (now I don't even own it anymore).

    But, like theflash1932 mentioned, don't count on Dell providing a bios update on a system that is 8 or 9 years old.