I'm working with a Power Edge 2800, and I'd like to enable Wake On LAN on this machine. In the BIOS setup (Revision A07), I haven't found any parameter for WOL...
I have Ubuntu Precise and I follow tutorials on the Internet to configure WOL. The loopback is receiving "magic packet" when I send it, but when I shutdown the system, nothing appends...
Any help? There is a parameter in the BIOS setup? I must update any firmware?
First, thanks. Then, I tried to press CTRL+S, CTRL+D and just D during the boot. Nothing... And there is no prompt wich tell me to press they keys: Just Setup, PXE boot, fast util and disk manager... How to fix that?
Since WOL is a feature from network interface cards, we'll probably need to verify first what is the network card currently in use and active on the server ( As mentioned by Chris, Ctrl - S for Broadcom ) . During POST, you should see the devices loading one by one ( Eg : the RAID controller, BMC / DRAC, network card ). WOL must be enabled at the configurations page of the NIC BIOS.
Also, it is highly recommended to have the BIOS and network drivers to be updated to latest. ( Although the option for Ubuntu OS would not be available from the support page, only RHEL and SUSE are. )
As for the documentation mentioned by redi87, that was pretty outdated and I think the Gen8 servers were not available back then, yet.
Thanks.
DC Lim
Dell | Social Outreach Services - Enterprise
Please follow @DellCaresPro on Twitter: www.twitter.com/DellCaresPro
I merely checked the BIOS fr any WoL support as like in ANY standard PC's, bt not present!I too hve the same issue on how to go inside the NIC BIOS & enable Wol support. CTRL + S?
Shld i first enable 'Embedded NIC MBA' the order to be 1st in BIOS Sequence or directly just press CTRL S to go to NIC BIOS?
Is it just a option to enable WOL , once inside the NIC BIOS or still have to install something to get it done?
Y Dell is complicating things like this instead of placing this option inside the system BIOS itself & making it tough to access it?
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
1192
0
Posted May 21st, 2012 14:00
You will see a prompt on boot up telling you to hit CTRL-S or D for the Intel Nic (boot agent), under that interface is the WOL settings.
Let me know how it goes.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!