UNSOLVED

ThomasTTS

updated

4 years ago

T

ThomasTTS

1 Rookie

•

15 Posts

0

152

September 28th, 2022 10:00

Unable to Power on FC630 Blades with 512GB of Memory

Hello,

We are running into an issue booting up our FC630 blades when we have 16 x 32GB 2400T-R installed in the blades. Yes, we have insured that the 16 modules were installed according to the manual(avoiding the green DIMM slots).

We can get them to boot with 256GB(8 modules), but not with any higher configurations.

The iDRAC FW version is 2.83

We also have have 4 PCI SAS HBA, and 10GigE Base-T 4 port modules installed.

We're running the 4 x FC630 configuration in a single FX2 enclosure on 2 x 20amp outlets form a Smart 3000 UPS.

Is it possible that we have insufficient power and need to upgrade to 30amp outlets?

Thank you for your insight.

 

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    78

    0

    Posted September 28th, 2022 16:00

    Hi, could you please have a look here: https://dell.to/3dTM7U3

     

    "Power supplies Chassis level – PowerEdge FX2 hot-plug PSU: 2000W, 1600W AC or 1100W AC in 1+1 redundant or 2+0 non-redundant configurations" 

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • DELL-Shine K

    6 Operator

    •

    3042 Posts

    75

    0

    Posted September 28th, 2022 21:00

    Did you have latest BIOS installed on the server. If not can you update BIOS to latest and check the behavior? Is the memory all identical and procured from Dell? Can you share the part# of the memory used?

    To ensure there is not faulty memory module, on 8 module setup,  can you swap the memory with other 8 module and ensure system is booting fine.