I rebooted the server, and will monitor it to see if the error comes up again. Should I proceed to update OpenManage ? On my server support page, there are many OpenManage options to install. We don't have an OpenManage server, and I don't see any OpenManage software installed in Programs / Features.
Dell OpenManage Deployment Toolkit, v.3.5.1, A00 Dell Systems Build and Update Utility Dell OpenManage Server Administrator Managed Node (Windows - 32bit), v6.5 Dell Management Station Service Pack for Windows, v.5.4.0, A00 Dell OpenManage Management Station, v.5.4.0, A00
The BMC watchdog is only intended to be used in conjunction with OpenManage Server Administrator. It uses one of the OMSA DSM services for the heartbeat. If you have never had OMSA installed then I'm not sure how the BMC watchdog was turned on. It is possible to configure it through IPMI, so a monitoring utility or someone may have inadvertently turned it on via IPMI commands.
You can install OpenManage Server Administrator Managed Node and go to System>Properties>Auto Recovery. If you set this option to none then it should turn off the BMC watchdog. If it is already set to none then set it to any other option, apply, set it back to none, and then apply again.
If you enable the BMC watchdog then OMSA needs to be installed and running on the system. If you decide to uninstall OMSA then you need to disable the BMC watchdog first by setting it to none.
I installed the OpenManage Server Administrator Managed Node on my server, and verified that BMC watchdog is set to off. I truncated the hardware log, and then ran another session of DSET to collect logs on my server.
Unfortunately, it appears that everytime I create a DSET report, something puts another entry into my ESM/hardware log. Any other suggestions?
Daniel My
12 Elder
•
6205 Posts
5162
1
Posted January 22nd, 2016 13:00
Hello
The BMC watchdog is only intended to be used in conjunction with OpenManage Server Administrator. It uses one of the OMSA DSM services for the heartbeat. If you have never had OMSA installed then I'm not sure how the BMC watchdog was turned on. It is possible to configure it through IPMI, so a monitoring utility or someone may have inadvertently turned it on via IPMI commands.
You can install OpenManage Server Administrator Managed Node and go to System>Properties>Auto Recovery. If you set this option to none then it should turn off the BMC watchdog. If it is already set to none then set it to any other option, apply, set it back to none, and then apply again.
If you enable the BMC watchdog then OMSA needs to be installed and running on the system. If you decide to uninstall OMSA then you need to disable the BMC watchdog first by setting it to none.
Thanks