LeoTZH

updated

5 years ago

L

LeoTZH

4 Posts

0

1453

November 30th, 2021 13:00

What's the RAM speed, CAS latency and voltage of OptiPlex 7090 SFF with gen 11 CPU?

In a OptiPlex 7090 SFF with a gen11 CPU, RAM module can run at speed as high as 3200M, with 1.2v, as per the specs.

I'm curious what the CAS latency would be in this case, and what the SPD data is.

Does anyone have such a system and have a CPU-Z screenshot to share? Thank you.

  • speedstep

    11 Legend

    •

    46969 Posts

    1037

    1

    Posted December 1st, 2021 04:00

    2666 MHz Intel Core i3/i5,
    2933 MHz Intel Core i7/i9,

    Dual channel mode would be required  not single channel

    The issue with the Mhz myth is that the CAS latency goes UP with the Mhz making some ram that is jedec 2133 2400 2666 CAS 16 faster than 3200 CAS 20

    An unlocked K series cpu would also be needed.

  • speedstep

    11 Legend

    •

    46969 Posts

    1070

    2

    Posted November 30th, 2021 18:00

    There is no XMP so with I3 I5 its JEDEC 2666 and I7 I9 its JEDEC 2933  likely CAS 20.

    Shipped with 3200MHz memory. However, with Intel Core i3/i5 processors, it is limited to 2666MHz. With all Intel Core i7/i9 processors, it is limited to 2933MHz.

     

    YMMV

  • LeoTZH

    4 Posts

    1049

    0

    Posted December 1st, 2021 02:00

    Thanks for the info.

    Here's the specs from Dell:

    OptiPlex 7090 Small Form Factor Setup and Specifications (dell.com)

    By looking at the section "Memory", it seems when configured in single channel mode with gen11 CPUs, RAM may be able to run at 3200MHz, but, the specs is quite confusing, and it doesn't mention the CAS latency. That's why I wonder if someone has such a system and can share some runtime CPU-Z screenshots.