UNSOLVED

DellBoyTrotter328a60

updated

12 days ago

D

DellBoyTrotter328a60

1 Rookie

•

2 Posts

•

5 Points

0

62

November 2nd, 2026 02:16

Dell Optiplex 7010 (2023 DDR4 version) PSU adapter for Flex-ATX PSU

Hey you guys.

 

I'm looking to upgrade a newer Optiplex 7010 SFF (2023 DDR4 version) with a dual-slot low profile GPU that requires an 8-pin power connector.

 

There are obviously two issues here.  The PSU needs to be a smaller Flex-ATX model, and the 24-pin standard plug requires an adapter compatible with the proprietary 8-pin socket on the motherboard.

 

I've got my eye on an Enhance ENP-7660L-OVT 600W PSU.  Where can I find an appropriate 24-pin to 8-pin adapter for this?

 

Also, is there a list for exactly which other Dell system models use the same 8-pin socket pin layout in order to cross-reference this issue?

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    5

    0

    Posted November 2nd, 2026 23:16

    No 24 to 8 pin adapter available for the new Dell 8 pinout.  Many modern Dell use the same pinout including Optiplex 7020, 7000, Inspiron 3910 etc.  quick tip is that if it has Intel 12-14th gen cpu Dell uses same 8 pinout as base pin

  • DellBoyTrotter328a60

    1 Rookie

    •

    2 Posts

    •

    5 Points

    3

    0

    Posted November 3rd, 2026 20:43

    @redxps630​ 

     

    So the Optiplex 7000 was released in March 2022.  Are you saying that, in four and a half years, nobody in the electrical world has figured out how to transfer adequate power from a 24-pin PSU plug into a newer Dell 8-pin socket?

     

    Is there confirmation anywhere that it is somehow technically impossible to achieve?

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    2

    0

    Posted November 3rd, 2026 23:49

    it is incompletely reverse-engineered but no commercial adapter available tmbk

     

    you can read here ​ https://www.dell.com/community/en/conversations/optiplex-desktops/optiplex-7000-sff-proprietary-8-pin-pinout-to-use-atx-supply/67fc2ffe0e95b43d2488bb77?page=3

     

    I recall one user said by skipping some unknown pins it was possible to jump start Dell motherboard but the safety and operational performance of doing that is unknown.