Windows 7 and Verizon Dell Mobile Broadband Utility
I have an XPS m1330 and installed Windows 7 over the weekend. I had had a great experience with it up until the point where I tried to connect to the internet using my imbedded broadband connection. So here's the deal - I'm hoping that someone has some suggestions.
First off, newer versions of the utility (2.09.xx) won't install on my computer. It gets near the end and then the install is "interrupted" and the install rolls back. Older versions (2.06.xx) do install but do not work well.
When 2.06.xx is installed one of three things happens. First, it will often simply not connect - getting to the "authenticating" stage and then give me an error. After a few tries, I can connect. However, it will then often drop the connection. It seems that this occurs when I'm idle for a minute or so. If I'm surfing around it has yet to drop me. Lastly, if I don't get dropped it ALWAYS reverts from the EVDO-Rev A connection to the slower Verizon national network.
I gave Verizon a call just to bounce things off of them. As expected, this was the first Windows 7 call that the tech had gotten but she was (surprisingly) very helpful. Looking at the log, she thought that this was more a connection issue than a Windows 7 issue and tried resetting a few things. Unfortunately, no dice. I then tried calling Dell and the tech did not know that there was a Windows 7 - I told him that the latest utility version was released the day that Windows 7 was released so that there was a decent chance that this was meant to work with it but he would have none of it.
At any rate, I love Windows 7 so far but since I rely on my mobile broadband, this could be a dealbreaker and hopefully someone has some suggestions.
Two specific questions that the tech could not answer: 1st, are there other versions of the utility program besides 2.06.xx and 2.09.xx? If there is an x.07.x or x.08.x that may be worth trying out. Second, are other programs usable with Dell (for instance, the VZ Access Manager)?
I have a very similar problem. I am running a Latitude D630. I did a clean install of Vista Business updated all drivers and patches. From there I upgraded to Windows 7. Prior to upgrading, I had tested the Dell Mobile Broadband Utility, Version 2.09.xx and it worked correctly. After upgrade, everything works seemless, except the Broadband Utility. I can start the application, it pulls up a signal, sees the Verizon Network, but when clicking on "connect" nothing happens. I checked the event logs, nothing shows up there. If I skip the broadband utility and open up the connection manager down by the system clock and choose 3G connection under dial-up, i receive the same results. My computer also fails trying to uninstall the broadband utility, it states that it was interrupted during the uninstall.
It's interesting. I installed 2.06.02.14 which was super buggy at first and immediately after Verizon's "tweaks" it still didn't work properly. However, after about 8 hours it started working very well. So who knows, I guess this is an issue on Verizon's end. If you can get any version to install, do it and call them up. One thing I might suggest is just doing a clean install of Win7 rather than an upgrade from Vista - I was warned strongly against the upgrade.
Now that that issue is solved, I can say that I am extremely satisfied with Windows 7. It occasionally locks up and I have to restart the computer ... but with the startup time for me being about 1/15 of what it was for Vista (I know, its part Win7 part clean re-install) I'm not complaining. Just looking forward to the full release.
I had similar problems with Windows 7 32-bit except with the AT&T Novetell Wireless card. For me, too, it would have been a deal-breaker. Then I did find that the the earlier version of the AT&T card driver did work. Then, when W7 64-bit was available, the newer drivers DO work. I had heard that the problem had something to do with something or other in IE8 beta (I forget what it was). So I even slipstreamed (vLite worked with W7) a copy without IE8. Still didn't work. BUT, that's in the past. For now, Windows 7 64-bit works and works FANTASTIC!
Now, for a question or two.
You mentioned lockups. My only two lockup problems are that just about every other boot the touchpad pointer locks up and every 3-10 boots, it blue screens from the nVidia driver. A wireless USB or bluetooth mouse do usually work, however, when the Synaptics touchpad locks up. Here are some of the things I've tried over the past 3-4 months all to NO AVAIL...
Pointer can lock up under these situations: No chipset drivers installed. Dell chipset drivers installed. Newer Intel chipset drivers installed. No Synaptics drivers installed. Latest Dell Synaptics drivers installed. Latest Synaptics drivers from Synaptics drivers installed. It can happen with no video drivers installed. It can happen with nVidia WDDM 1.1 (beta) drivers installed. It can happen with latest Dell Vista drivers installed. It can happen with latest nVida drivers installed. I can It can happen with nothing installed, period. Just install W7 and boot a couple times and the pointer will lockup. No software whatsoever, or any software, it seems to lockup about every other time. As you see I've given this a bit of testing. I've probably installed W7 30 times in various combinations, 32 and 64 bit. Probably a lot of wasted time because Microsoft will probably get that figured out soon.
As for the nVidia BSOD, that will probably go away with a later Beta too.
Are these your same issues and have you found anything that helps?
I'm confident Microsoft will get this straightened out but in the meantime, Windows 7 is SO FANTASTIC that I will live with it if I have to. I mean, 47 second reboot times! I've got some VERY tweaked XP Pro installations for my M1330 and even they don't compare.
Let me know what you think and/or if you have any links for help on the two M1330 issues. Thanks.
I don't have the exact link saved but was able to find several versions of the utility on the Dell site. If I'm not mistaken, though, you may have to do a search outside of Dell for it (eg, Google "Dell Mobile Broadband Utility Verizon") and it will give you a link to the download on Dell ... as opposed to trying to search for it on the Dell site. Regardless - its out there if you look for it. Good luck!
gbwieler
1 Message
1442
1
Posted January 14th, 2009 08:00
I have a very similar problem. I am running a Latitude D630. I did a clean install of Vista Business updated all drivers and patches. From there I upgraded to Windows 7. Prior to upgrading, I had tested the Dell Mobile Broadband Utility, Version 2.09.xx and it worked correctly. After upgrade, everything works seemless, except the Broadband Utility. I can start the application, it pulls up a signal, sees the Verizon Network, but when clicking on "connect" nothing happens. I checked the event logs, nothing shows up there. If I skip the broadband utility and open up the connection manager down by the system clock and choose 3G connection under dial-up, i receive the same results. My computer also fails trying to uninstall the broadband utility, it states that it was interrupted during the uninstall.