UNSOLVED

ta79rich

updated

22 years ago

T

ta79rich

10 Posts

0

6342

October 26th, 2004 19:00

GX260 RIS Windows XP with SP2 from a Windows2003 server

Has anyone had any success using the RIS Solution guide to GX260/SX260 and GX270/SX270, but instead slipstreaming in WinXP SP2.  The machine will RIS fine with SP1a, the correct (edited .inf file) drivers added, and the .28 NTLDR build version.  For the WinXP SP2 image, I've tried both .28, the original, and even used the setupldr.exe from SP2 and renamed it to NTLDR (.2180) for my RIS image, but no luck.  I even built a working image without service packs and then slipsteamed SP2 without luck, again trying all 3 NTLDR builds, but no luck. 
 
The original problem I had was that the machine would PXE boot, load the files, and then stop with the message, "Setup is Starting Windows".  Trying the different build versions of NTLDR, I've also had error messages saying, "Corrupt NTFS.sys file". 
 
Any help on this would be great.  My boss is getting tired of seeing this on my worklist.  :smileyvery-happy:
 
Thanks
Rich
  • 135

    0

    Posted November 2nd, 2004 10:00

    Here's something I came across, though it is for Windows 2000 Server RIS, it may still be pertinent (if not, it would be wise to bear in mind for future, perhaps):

    "Do not attempt to slipstream a service pack into an existing RIS image—you will render the image unusable. Instead, create a second image using slipstreamed files."

    From: http://www.mcpmag.com/columns/article.asp?EditorialsID=509

     

    Will