I am trying to create a DOS boot disk for Ghost 7.5 and I keep getting the error Unable to locate the NIC. I know the NIC is working because I had it on our LAN. I have used the latest drivers for the card. Anyone have any suggestions?
Well, it may not like trying to transplant my settings to you, go to <ADMIN NOTE: Broken link has been removed from this post by Dell> and pick GX260 for the system, Dos for the operating system and network drivers for the download type.
I am having problems creating a boot disk for the NIC Intel 1000 on a GX260. I have managed to obtain the driver which is something. However, I am wondering whether I need to specify an IOADDRESS or SLOT or something similar in the Protocol.ini?
If anyone has got this working would they so kind as to share their protocol.ini with me. It would be appreciated?
I have a ghost disk that works but it takes 15 hours, or more, to do an image. has any one else had this problem? Any cure besides putting in another NIC card?
An extended download time like you describe is generally caused by a duplex mismatch. For instance, if the Network switch you are connecting to is hard set to 100 full duplex, and you are leaving the nic driver in Auto, it will not detect the duplex settings correctly and your system will be running in 100 half while the switch is running at 100 full.
Try editing the protocol.ini on your boot disk and hard set it to 100 full. I think the setting is speedduplex=3
droid256
73 Posts
961
0
Posted September 18th, 2002 21:00
http://support.dell.com/us/en/filelib/results.asp?sid=PLX_PNT_P4_GX260〈=EN&lib=5&os=DOS&searchtype=filter&devid=2439
Droid