
UNSOLVED
RPS LED on 6248 question
I have some overheating 6248's. They each have an RPS-600 attached. The RPS's all have 4 LED's on the front numbered 1-4. Some of these are blinking green constantly. I can't find any explanation for these LED's in the RPS or switch manuals. Please advise. Thanks.
Trent
Responses (2)
Solutions (0)

bh1633
909 Posts
1143
1
Posted November 3rd, 2009 06:00
5 leds on RPS panel – far right is FAN LED (green is good), next four are for the 4 Power Supplies’ status.
Status - Solid green means Power is being supplied and all is good.
Status - Blinking green means power available OK but not being utilized.
Status - Red means bad RPS power.