UNSOLVED

Serial Sledder

updated

2 years ago

SS

Serial Sledder

1 Rookie

•

2 Posts

•

2 Points

0

66

November 20th, 2024 15:03

Replacing Dell 4032 and Ubiquiti EdgeSwitch 16 with Dell 5248F-ON questions

Hello all!  I'm currently working on a project to phase out two Dell 4032 and two Ubiquiti EdgeSwitch 16's with two Dell 5248 switches.  The current set sits between our two NetApp Vsan units and 3 VMWare hosts.  The NetApps have two controllers per device and we currently have two NICs per controller set up in a lag config running to the Ubiquiti switches, so a total of 8 DAC cables.  From the Ubiquiti Switches there are two ports(LAG) from each switch connected to our two 4032 switches that are in stacked configuration.   Below is how I have the 5248 switches set up currently.  Does anyone see any reasons this wouldn't work to replace the 4 switches?

5248 Switch 1

interface port-channel10
 description "Netapp2 Controller 1 port-channel"
 no shutdown
 switchport mode trunk
 switchport access vlan 1
 switchport trunk allowed vlan 102
!
interface port-channel20
 description "NetApp1 Controller1 Port-Channel"
 no shutdown
 switchport mode trunk
 switchport access vlan 1
 switchport trunk allowed vlan 102
!
interface ethernet1/1/1:1
 description "VMWare Host 1"
 no shutdown
 switchport access vlan 102
 flowcontrol receive off
!
interface ethernet1/1/2:1
 description "VMWare Host 2"
 no shutdown
 switchport access vlan 102
 flowcontrol receive off
!
interface ethernet1/1/3:1
 description "VMWare Host 3"
 no shutdown
 switchport access vlan 102
 flowcontrol receive off
!
interface ethernet1/1/4:1
 description "NetApp1 Controller 1"
 no shutdown
 channel-group 20 mode active
 no switchport
 flowcontrol receive off
!
interface ethernet1/1/5:1
 description "Netapp2 Controller 1"
 no shutdown
 channel-group 10 mode active
 no switchport
 flowcontrol receive off
!
interface ethernet1/1/6:1
 description "NetApp1 Controller 1"
 no shutdown
 channel-group 20 mode active
 no switchport
 flowcontrol receive off
!
interface ethernet1/1/7:1
 description "Netapp2 Controller 1"
 no shutdown
 channel-group 10 mode active
 no switchport
 flowcontrol receive off

5248 Switch 2

interface port-channel30
 description "Netapp2 Controller 2 port-channel"
 no shutdown
 switchport mode trunk
 switchport access vlan 1
 switchport trunk allowed vlan 102
!
interface port-channel40
 description "NetApp1 Controller 2 Port-Channel"
 no shutdown
 switchport mode trunk
 switchport access vlan 1
 switchport trunk allowed vlan 102

interface ethernet1/1/1:1
 description "VMWare Host 1"
 no shutdown
 switchport access vlan 102
 flowcontrol receive off
!
interface ethernet1/1/2:1
 description "VMWare Host 2"
 no shutdown
 switchport access vlan 102
 flowcontrol receive off
!
interface ethernet1/1/3:1
 description "VMWare Host 3"
 no shutdown
 switchport access vlan 102
 flowcontrol receive off
!
interface ethernet1/1/4:1
 description "NetApp1 Controller 2"
 no shutdown
 channel-group 40 mode active
 no switchport
 flowcontrol receive off
!
interface ethernet1/1/5:1
 description "Netapp2 Controller 2"
 no shutdown
 channel-group 30 mode active
 no switchport
 flowcontrol receive off
!
interface ethernet1/1/6:1
 description "NetApp1 Controller 2"
 no shutdown
 channel-group 40 mode active
 no switchport
 flowcontrol receive off
!
interface ethernet1/1/7:1
 description "Netapp2 Controller 2"
 no shutdown
 channel-group 30 mode active
 no switchport
 flowcontrol receive off

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    0

    0

    Posted November 21st, 2024 08:03

    Hello thanks for choosing Dell and welcome to our community.
    For us to help you the best that you send tech support your logs with an official ticket. https://dell.to/4eI7HnY The assist on the forum may be limited. 
    However for now, what I can point out is that it looks like there's some misconfiguration.
    Can you tell us if your configuration is following this topology that I shared? Because there has to be some special configuration done on OS10 switches(S5248F). You can share your own topology diagram if you like for our better understanding.

     

    Image


    Respectfully,

     

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • Serial Sledder

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted December 4th, 2024 14:05

    Sorry for the late response.  Thanksgiving week was hectic.  I'll get a diagram loaded as quick as I can to show