One of my save groups ran as usual last night, all files saved to tape but the client index has not saved. the status is "contacting client"
I've checked services, connectivity etc between client and server and all seems to be ok.
Incidentally the existing index size for the client in question has reached 99Gb in size.
I've tried to reduce this size by removing some of the oldest cycles, there is plenty of disk space on server and client.
browse /retention policies were set to 1 Year
This is the second day of failover for that client I had to cancel the job at about 2:00 pm yesterday, so this is the second time this savegroup is running
I'm not aware there is an size limit for index, but if you remove (lower) existing browse which should not be there you should gain some space. After that run nsrim and nsrck check for that client (it will take some time).
niallo1_514e99
22 Posts
447
0
Posted April 18th, 2008 07:00
I had to cancel the job at about 2:00 pm yesterday, so this is the second time this savegroup is running
I'll try what you suggest