UNSOLVED

arveskjorestad

updated

8 years ago

0

5175

October 29th, 2018 04:00

U2719DC, Dual, Latitude 7490, resolution issue

Hi,

I recently purchased a Dell Latitude 7490 together with two Dell Ultrasharp U2719DC USB-C monitors.

I have connected the laptop to the first monitor using the USB-C cable. From the first to the second monitor I have used the Displayport cable from the "DP out" port on the first monitor to the "DP in" port on the second monitor (DisplayPort daisy chaining).

Both monitors are working, but I only get a resolution of 2048x1080 on the first monitor. I cannot select a higher resolution in the graphic util at all. The other monitor displays the correct resolution, 2560x1440. The funny thing is that it is the last monitor (the one daisy chained with DP) which correctly displays 2560x1440, while the first monitor (which is directly connected via USB-C) is limited to 2048x1080.

Any ideas what I am doing wrong? I have updated the laptop with latest BIOS, display drivers etc. Running windows 10.

Regards,

Arve Skjørestad

   

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    4829

    0

    Posted October 30th, 2018 07:00

    Is this your current setup?
    Latitude 7490 USB Type-C port --> USB Type-C cable (C to C) --> #1 U2719DC USB Type-C/DP in port (Menu- Display- MST on)
    #1 U2719DC DP out port --> DP to DP cable --> #2 U2719DC DP in port (Menu- Display- MST off)

     

    * Turn all three off
    * Disconnect all/both U2719DC cabling from the Latitude 7490 and each other
    * Test each U2719DC by itself using the USB Type-C cable (C to C) cable with MST off
    * In this single U2719DC setup, do both U2719DC show the full resolution of 2560x1440 60Hz?


    DELL-Chris M (old account)

    #IWork4Dell

  • 4807

    0

    Posted October 31st, 2018 02:00

    Hi,

    Yes, the setup you are describing is identical to my setup. MST is on on the first monitor and off on the second.

    Yes, both U2719DC monitors shows the full resolution when used in single setup, I re-tested this now. 

    As you can see from the image here:

    https://www.dropbox.com/s/9f0zkqdzmqqt7l1/2018-10-31%2008.10.07.jpg?dl=0

    ...for the first monitor, I cannot select any resolution higher than 2048x1020.

    I have tried configuring both through Windows' display manager and the GUI of the Intel Graphics driver.

    The graphics driver installed is the latest Intel Graphics driver from intel.com (version 25.20.100...).

     

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    4803

    0

    Posted October 31st, 2018 06:00

    Perhaps the laptop just cannot drive all three (laptop LCD + U2719DC + U2719DC)? Test by closing the laptop lid. Can you then set both U2719DC to 2560x1440 60Hz?


    DELL-Chris M (old account)

    #IWork4Dell

  • 4791

    1

    Posted October 31st, 2018 14:00

    No, that would be strange. I have been using Dell Latitude laptops for many years, and havent' had issues with running laptop + 2 external monitors in years. We have a lot of E7450's running this configuration (one even runs with 3 external displays), but that is through a docking station and not USB-C.

    Having read more details about the graphics card (https://ark.intel.com/products/124968/Intel-Core-i7-8650U-Processor-8M-Cache-up-to-4-20-GHz-), one possible answer is that only one DP stream is exposed trough the USB-C port, and each DP stream has a max resolution of 4096x2304, meaning two monitors with 2560 is too much. The other two DP streams are reserved for the internal display and the HDMI port.

    So I guess the solution is to attach one of the monitors through HDMI instead. But that is really not what I was hoping for  I was hoping that the USB-C cable was the only cable required.

    But it would be very nice if you could verify my theory above 100% with Dell product specialists.

  • Dachr

    3 Posts

    4762

    0

    Posted November 2nd, 2018 00:00

    I'm seeing the exact same issue with my 2x U2719DC on my Dell XPS 9560. Well somewhat exact.. On my setup it's the second monitor that is unable to show a higher resolution. Kinda disappointing, since I bought these exact monitors to avoid having to buy a Thunderbolt dock.
  • 4712

    0

    Posted November 4th, 2018 22:00

    When connecting one of the monitors through HDMI and the other through USB-C, everything works fine, with correct resolution on both displays. So this confirms my theory about the display stream through the USB-C port is not able to deliver more than approx 4000 pixels, which is not enough for two U2719DC.

    So I guess the USB-C mantra "one cable to rule them all" still does not apply 100%.. I have been able to connect every other equipment through the two monitors' usb-hubs though, so connecting that extra HDMI cable every day should be acceptable..

  • Dachr

    3 Posts

    4631

    0

    Posted November 7th, 2018 22:00

    That's the same solution I went with. It would've been nice to have everything connected through that one port, without having to buy a TB dock though.

  • Ivan5991

    2 Posts

    4623

    0

    Posted November 8th, 2018 05:00

    Hi, I found on the internet a monitor of the brand Sceptre27" Curved 75Hz LED Monitor C278W-1920R, on the IPS, 60Hz, 5ms, 3000: 1
    Maybe who tested used such? I compare it with Dell, Asus, and Aker (one price category), here is a link for those who are interested in https://www.bestadvisor.com/computer-monitors
    let me know if something is known, I think to take it to test, soon I'll write here again1.png