
UNSOLVED
Closed
S2340M, Two, new, ghosting and a slight red and green
I recently bought 2 S2340M recently both left halves of the screens are totally fine but the right half, starting at the center and gradually getting worse toward the right edge, its pixelated, with a slight red or green ghosting. There is also some image burn-in in the affected area of the screen. Image burn in occurs very quickly while on and working. In a matter of minutes. I've ran diagnostics on both and it doesn't help. I've tried all inputs and different computers as well. I think its a defect in this monitor lineup.
Responses (5)
Solutions (0)
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
440
0
Posted December 10th, 2015 09:00
Based on the worldwide number of exchanges, a recall is not justified. We do not even have the number of exchanges required to ask the vendor to investigate.
DELL-Chris M (old account)
#IWork4Dell
I also have a failing S2340M. Same issue as above, but on the left side. I got it for X-mas last year so it has been used for 11 months. I think this particular model only has 1 year warranty (good thing for Dell!). Since this monitor was purchased at Costco before X-mas rush, it is out of warranty. This monitor looked great at first, but is clearly sub-standard. Dell should consider a recall or extended warranty. There are several other reviews and posts indicating problems with it.
HarryMangurian
8 Posts
440
0
Posted December 13th, 2015 05:00
I have the same problem on display's left hand side. I can also make out characters from my address book that persist on the screen. Using an all white background, all I see is discoloration. Using a non-white background, I can read the persistent (or burned in) characters. Very disturbing once you see it. Oh well, back to Viewsonic.
Mistaj1427
1 Message
0
0
Posted November 30th, 2023 14:42
It happened on mine as well. So i reset factory settings, and now I am running the LCD conditioning cycle and the colors are fine. Try that, and change your VGB cable. Also have you checked the display settings on your PC? make sure the resolution is properly set or it won't display images properly.. The other reasons would be defects and damage. Using the wrong power adapter or having a `power surge in your house could cause this.

DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
440
0
Posted December 4th, 2015 07:00
Assumed you reset both monitors to Factory Defaults using the OSD (On Screen Display)? It would be helpful if you would post pictures of both monitors while running the BID (Built-in Diagnostics). See page 26 in the online S2340M User's Guide. If this was a defect in the entire line, we would have seen many more exchanges, which we have not. You may just have two defective monitors.
(edited)
DELL-Chris M (old account)
#IWork4Dell