UNSOLVED

RARIHUT

updated

6 years ago

R

RARIHUT

1 Rookie

•

32 Posts

0

2085

February 22nd, 2021 08:00

Optiplex 3080 MFF (Micro), U2412M, how to connect?

Dell U2412M    port   -    VGA\DVI\DP

I don`t understand why it`s so complicated to connect Dell OptiPlex 3080 to Dell U2412M screen over Digital port. 

My attempts :

Pc HDMI Female -> Screen DVI     

 -  No signal 

Pc DP Female - > (DP male <->HDMI female adapter) - > HDMI male DVI Male cable to Screen DVI female 

 -    No signal 

Pc analog VGA  - >  Screen analog VGA  port         -  Work 

What`s going on ? 

What do I need to do ? 

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    1507

    0

    Posted February 22nd, 2021 11:00

    @RARIHUT  All of those should work.  Just to confirm, did you switch the input of the display over to DVI when you were connecting to its DVI input?  I realize that might sound like a simplistic suggestion, but I once spent quite a bit of time troubleshooting an issue like this with another user before I realized that the user simply didn't realize they had to change inputs on the display.  And I've had similar cases where skipping the basic troubleshooting steps on the assumption that the user had already attempted them or had basic understanding turned out to be a bad assumption.  So now I try not to skip the basic troubleshooting steps.

    If you changed the input to DVI when testing the HDMI and DP outputs, do you have some other way to verify that your HDMI to DVI cable works?

  • RARIHUT

    1 Rookie

    •

    32 Posts

    1502

    0

    Posted February 22nd, 2021 12:00

    Yes!!! Of course.    (IT Manager) 

    When I change to DVI-D source  , I getting screen message - Entering Power Save Mode -.  from Day 1.

    Getting signal only from VGA source. I know It`s really really strange.

    I thought that the problem was my laptop , buy last week I bouget new OptiPlex 3080, same problem...

    My HDMI-DVI cable is ok .

    It`s hard to believe but It`s look like manufacture fault... 

    Any Idea ?    (I saw that other model have reset option -10 sec on power button- ) 

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    1495

    0

    Posted February 22nd, 2021 13:00

    @RARIHUT  Quick callout about that KB article I linked above.  It also makes reference to a "Multi-Display" option in the BIOS that has to be enabled.  Seems odd to have to enable that in the BIOS rather than just having all outputs be available, but you may want to check that as well.

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    1496

    0

    Posted February 22nd, 2021 13:00

    @RARIHUT  Aha!  An IT manager.  Well then you can probably relate to overestimating users sometimes.

    The only other thought I can provide here is that a few years back I remember helping a friend buy about 10 identical used OptiPlex workstations.  I made sure they all had the DP output drop-in bracket that attached to the motherboard, which was optional, and on every single one of them the DP output was dead.  And I found multiple other threads on this forum about the same issue.  But bizarrely, having JUST NOW Googled that in order to verify that I had remembered the model correctly, I found this KB article about that exact issue, and it says that it's fixed in a BIOS update, which I guess wasn't available when we bought those systems since I definitely updated the BIOS.  I realize that's not the same system you're talking about, but if you haven't already, I'd verify that you're running the latest BIOS yourself.

  • RARIHUT

    1 Rookie

    •

    32 Posts

    1492

    0

    Posted February 22nd, 2021 14:00

    Hi, 

    Almost the latest bios version (1.3.1) . (Because the new latest 1.3.2 as a noise problem) . 

    I don`t see any Multi-Display option on my bios.

    P.S  The Optiplex 3080 new from the box 

    It`s look like screen problem . 

     

     

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    1480

    0

    Posted February 22nd, 2021 15:00

    * What is the 20 digit serial number on this U2412M? That will tell us when it was built
    * The Optiplex 3080 MFF does not have a VGA out port? It has DP 1.4, HDMI 2.0b, HDMI 1.4. So this is confusing 
    "Pc analog VGA -> Screen analog VGA port - Work"


    DELL-Chris M (old account)

    #IWork4Dell

  • RARIHUT

    1 Rookie

    •

    32 Posts

    1449

    0

    Posted February 22nd, 2021 23:00

    Hi,

    My micro OptiPlex 3080  - include  VGA\HDMI\DP ports.

    from  https://www.dell.com/support/kbdoc/en-us/000180604/dell-optiplex-3080-visual-guide?lang=en         

     (Dell Serial/Video Port (Serial/PS2/DP 1.4/HDMI 2.0b/VGA) (Optional)) 

     

    Screen U2412M serial number :CN-00FFXD-74261-35K-078S             T 

    Thanks 

  • DELL-Cares

    Moderator

    •

    27849 Posts

    •

    763 Points

    1447

    0

    Posted February 22nd, 2021 23:00

    To ensure the security of your information, I'd suggest that you delete the post containing any Dell-centric information & send us a private/direct message.


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    1425

    0

    Posted February 23rd, 2021 05:00

    Understood now!

    CN-00FFXD-74261-35K-078S = Built on May 20, 2013, 7 years/281 days old


    DELL-Chris M (old account)

    #IWork4Dell

  • RARIHUT

    1 Rookie

    •

    32 Posts

    336

    0

    Posted February 23rd, 2021 07:00

    That ports  Never Work ...  (From day 1) ....

    The questions is way ?