UNSOLVED

Devin47

updated

21 years ago

D

Devin47

3 Posts

0

21997

April 6th, 2006 03:00

Dell 2405FPW -- Too Bright - How to tone it down

My 2405FPW is connnected using a DVI connection on a GeForce 6600 video card. I have used the monitor controls to to turn the monitor brightness down to 0 (zero) and it is still much brighter than my eyes can tolorate for more that an hour or so. 
 
Does anyone know of a way to get the brightness turned down further?
  • Jesse L (retired)

    10 Wizard

    •

    17898 Posts

    •

    69016 Points

    907

    0

    Posted April 6th, 2006 12:00

    Devin47,

    Thank you for using the Dell Community Forum.

    Here is some information that my help you resolve the brightness issue with the monitor.

    • Perform monitor reset on "All Settings"
    • Push Auto Adjust button
    • Adjust brightness & contrast controls

      curved top left corner blank spacer curved top right corner
      blank spacer
      blank spacer blank spacer
      A NOTE indicates important information that helps you make better use of your computer. NOTE: When using '2: DVI-D', the contrast adjustment is not available.

     

    Jesse L (retired)

  • Devin47

    3 Posts

    907

    0

    Posted April 7th, 2006 04:00

    Thanks Jessie, I appreciate your response. 
     
    I tried your suggestions.  The only thing that does not respond on the monitor is the "Auto Adjust".  The message "Auto Adjust In Progress" as indicated in the "User Guide" does not display when I press this button.  Should I be concerned about this?
     
    When I adjust the Brightness, I turn it all the way to 0 (zero).  With this setting the monitor is almost brighter than my other LCD's monitor when they are turned all the way up.
     
    If you have other suggestions I would welcome them.
  • noritsugu

    121 Posts

    907

    0

    Posted April 7th, 2006 21:00

    Why don't you use nvidia ForceWare setup?
    You can change brightness and contrast with it.

    http://www.tweakguides.com/NVFORCE_1.html
  • Devin47

    3 Posts

    907

    0

    Posted April 9th, 2006 15:00

    Thanks very much!!    The nvidia settings made it much better.  Atleast I don't feel like I am getting a 'tan'. 
     
     
    Cheers!
  • EquusD

    9 Posts

    907

    0

    Posted May 17th, 2006 05:00

    I'm giving a 2405FPW a try for the first time, and I felt like I was going snow-blind. Set the monitor brightness down to zero, and I was still uncomfortable. I've got ATI (Radeon X300 on a Dim9100), and it also has an advanced driver setting. After reading this thread, I switched to the ATI Color tab and bumped Color and Contrast down by about three quarters. Much better! I was worried for a moment there that this was unusable. My background light level is low, so the monitor can't go too bright. I'm surprised that the native setting didn't offer a greater range of control. Maybe the next revision session of the monitor firmware should see if they can enhance the native range.

    P.S. Here's an important supplement to the previous paragraph (which I wrote yesterday). After adjusting the brightness as described, I still wasn't quite happy with the appearance. Try as I might, there still seemed something disturbing and wrong. This led me to explore the native 2405FPW "color settings" control, which alters the RGB values. It was 50:50:50. These numbers can be set individually; alternatively there is a selectable "PC standard preset" and "Mac standard preset", as well as blue- and red-oriented presets. I tried the PC preset, which set RGB to 29:38:28. My immediate reaction: Much better! Certainly anyone who experienced unhappiness with the image should give this a try!

    Also, FWIW, the RGB settings could additionally by used to simply lower the native brightness even lower. That is, after we bumped into the zero settings for brightness, then changing the 50:50:50 to 25:25:25 should go lower still. But my immediate sense (to be contemplated over time) is that the altered ratios (toning down red and blue relative to green) is important.

    Message Edited by EquusD on 05-17-200606:42 PM

    Message Edited by EquusD on 05-17-200606:47 PM