I recently moved my Dimension 8100 from the office, where I used an LCD monitor, to home where I want to use a DELL Trinitron. When I boot-up the system at home, the WIndows 2000 screen loads OK but then the system freezes. Is it a driver problem? Or, is it something more sinister, like a damaged HDD?
More than likely driver. Were you using the DVI port for the LCD? If not the LCD driver over the analog port is causing the system to not see the CRT. Sounds like you'll have to boot to safe mode to correct. Good luck!
It's weired. Windows 2000 should be able to talk to a monitor via DDC so at least it thinks the Dell Trinitron is a Plug-n-Play monitor. It could be a monitor driver (not video card driver) problem. If you can get in Windows 2000 in safe mode and manually install the Dell Trinitron monitor driver, it should be fine.
Joe Average
179 Posts
355
0
Posted March 22nd, 2004 15:00