
UNSOLVED
Closed
2408WFP, overscan problem
I bought a Dell 2408WFP LCD monitor on 8-15-2008. After connecting the LCD to the computer with a dvi cable and switched it on, I discovered the LCD overscans, that is, the screen image is larger than the desktop area at 1920x1200 resolution. However, if it is set at 1600x1200, it does not overscan. If it is connected with a VGA cable, the problem does not arise. Dell gave me a replacement. But when the replacement arrived, I found that the problem is not resolved. The overscan problem is still there. The LCD is A00 edition whereas the cd is A01 rev. Dell technical support is unable to resolve the problem. Please help me to resolve the overscan problem.
(edited)
Responses (9)
Solutions (0)
I've unchecked the box 'Treat as HDTV' and tried to create custom resolution.
The overscanning problem still there.
When I clicked on properties and then setting, there is an option of 1920x1200.
When this resolution is set, there is overscanning problem.
Anybody else having such problem?
I've read dozens of threads on this issue and I'm still not sure about it.
First thing to try is open the nVidia Control Panel and choose 'Advanced Settings'.
Then go to Display > Manage Custom Resolutions, uncheck 'Treat as HDTV' and click Apply.
If that doesn't work I'd try creating a custom resolution using 'CVT reduced blanking'.
You might have to then go back to 'Change Resolution' to enable it.
I've also read that 1920x1200 is not supported over DVI on the FX5xxx series cards.
hmm very old card .. after doing a quick search ( not easy ) i found one tech spec for 1 version of the 5500...
it said it supported 1920 x 1200 @ 85
the 2408 doesnt do 85 refresh
could be your problem is the card wont do the necessary refresh rate
The 1920x1200 @85Hz spec would not have been for DVI.
This article describes how FX5200 cards could not reliably support the pixel clock rate required for high resolutions. My understanding is that it was the case for all 5xxx series cards and at some point nVidia disabled support for 1920x1200 in the driver.
The solution for others with the same problem in this forum has been to replace the card.

gpro
2 Intern
•
2024 Posts
1420
0
Posted September 2nd, 2008 09:00