UNSOLVED

R14K-600

updated

20 years ago

R6

R14K-600

4 Posts

0

52280

September 2nd, 2006 21:00

2407WFP A03 - No Problems

I've been following some of the posts here concerning the 2407WFP and issues users are having with banding. I 've noticed there seem to very few posts from users with revision A03. I have a 2407WFP, revision A03, received in the US on Friday, 25 August. I've used it extensively since, and have performed the tests for banding mentioned in other posts here. These is *no* evidence of banding using either the VGA or DVI interfaces.

Based on this example, the 2407WFP, revision A03, displays no banding. If, as posts here seem to suggest, banding was systemic with the A02 and earlier revisions of the 2407WFP, then revision A03 has undergone firmware changes, hardware changes, or both. I'd unfairly point out that the relative lack of posts by A03 owners seems to support this.

Since I have no experience with the A02 firmware, I can't offer anything other than anecdotal evidence on changes between the two revisions, but I can say that this 2407WFP has none of the reported banding issues.

One doesn't have to read may posts here before discovering ChrisM has a thankless job. So, without meaning to belittle ChrisM's position or knowledge, it is possible he's not privy to exactly what changes with each successive revision - so before getting to excited about the announcement that A03 changed only menu language, you'll want to recall the announcement that there'd be no A03. Or perhaps ChrisM is correct and there have been hardware revisions as well.

In closing, the 2407WFP is a *great* monitor, if I needed another monitor, it'd be first on my list.
  • 352

    0

    Posted September 2nd, 2006 22:00

    Does your monitor experience the shimmering of the mouse trail still?
  • R14K-600

    4 Posts

    352

    0

    Posted September 2nd, 2006 23:00

    No trace of "shimmering mouse trails" regardless of the color of the background.
  • radxge2

    1 Rookie

    •

    77 Posts

    352

    0

    Posted September 3rd, 2006 00:00

    I am the owner of the A03 revision which displays no banding using DVI.
    However, I see the "shimmering mouse trails when I move my mouse over a white background.  Note that my brightness level is curently set to 40.  What is your monitor setting?
    The firmware version of the A03 is V1B20 and the I am not  able to set 4:3 mode at 1600x1200.
     
    Also, a lot of individuals are anxious to see if the component inputs has been fixed.
    Can you please test the component inputs?  That would be really appreciated.
    I cannot test this because I do not have any device that uses the component inputs,
     
    Thanks.
     

    Message Edited by RadXGe on 09-03-200608:39 AM

  • v1p3r

    1 Message

    352

    0

    Posted September 3rd, 2006 09:00

    As well as the component inputs, could you also check the following bugs?

    1. Not being able to set 4:3 mode at 1600x1200.
    2. The PIP input setting resetting to S-Video if the screen is turned off.

    Everyones so concerned about the big bugs I haven't been able to find any information about the more minor ones :)

    Thanks.
  • ArchAnge1

    344 Posts

    352

    0

    Posted September 3rd, 2006 17:00

    whats this ? another good a03 ? how many does that make now ? about 4 i think that have come forward

    R14K-600, sorry to be a pain but is there any chance you could take some photos of some gradients like some others have, as im sure 100's if not 1000's of people are hanging to see some more nice pictures here :)
    It could make you an instant hero all over the planet.

    thanks for helping us piece together this broken puzzle..
  • 352

    0

    Posted September 4th, 2006 01:00

    Hello there, may I know you guys used which programme to perform tests for banding? Thank you! :)
  • radxge2

    1 Rookie

    •

    77 Posts

    352

    0

    Posted September 4th, 2006 02:00


    Whiteshadows wrote:
    Hello there, may I know you guys used which programme to perform tests for banding? Thank you! :)

    I use the following to test for banding:

    http://hetyo-wiz.mydns.jp/hw_upload/~2407wfp/file/up2407WFP_0044.png

    http://www.spronkey.com/sdc-gradients.png

    http://www.dps.uk.com/freeware_DTP.htm (this is a dead pixel tester software but can also display gradient)

     

    Message Edited by RadXGe on 09-03-200611:31 PM

  • all the facts

    2 Intern

    •

    983 Posts

    352

    0

    Posted September 6th, 2006 01:00

    R14K-600

    Try Passmark Monitor Test it's free. 25 test screens.

    http://www.passmark.com/products/monitortest.htm

    Please test for vertical and horizontal banding in Gamming and Multimedia modes as well as Desktop.

    List your brand and model of video card.

    The 2nd .png RadXGe listed is very good as well.

    Thanks :)
  • R14K-600

    4 Posts

    352

    0

    Posted September 6th, 2006 05:00


    @all the facts wrote:
    R14K-600

    Try Passmark Monitor Test it's free. 25 test screens.

    http://www.passmark.com/products/monitortest.htm

    Please test for vertical and horizontal banding in Gamming and Multimedia modes as well as Desktop.

    List your brand and model of video card.

    The 2nd .png RadXGe listed is very good as well.

    Thanks :)




    Unfortunately, it won't run on the systems attached to this 2407WFP.

    VGA port: SGI Octane workstation with V12 graphics (1920x1200x60). The OS is IRIX.

    DVI port: PowerMac G4 with ATI Radeon9000 graphics (1920x1200x60) running OS X.

    IRIX provides a suite of monitor/graphics tests I've used on the VGA port with seeing any banding. I've also downloaded and displayed the gradient files RadXGe referenced on both systems(VGA and DVI) without any trace of banding.

    BTW - for those who asked, I don't have any componet video hardware to test with.
  • all the facts

    2 Intern

    •

    983 Posts

    198

    0

    Posted September 6th, 2006 10:00

    R14K-600 wrote:

    "I've also downloaded and displayed the gradient files RadXGe referenced on both systems(VGA and DVI) without any trace of banding."

    Is that also true in Multimedia and Gaming modes as well as Desktop?

    Desktop mode should be clear, but the other two modes are still being reported as a problem with heavy banding.

    Thanks


    You might find this interesting:

    LCD vertical banding is a flaw that can occur in the manufacturing process of the LCD panels themselves, and some LCD panels will tend to manifest it more noticeably than others. The panels that cause the most visible problems are usually weeded out in the vendor's quality control process.
    However, those that create just a hint of banding often pass through QC, since it is prohibitively expensive to discard all parts that exhibit flaws which may have no practical impact on picture quality.

    So, we end up with a situation in which some LCD panels, even within a given production run on one model, will have no banding at all, some may have a hint of it that does not rise to the level of a significant issue, and some may have a more visible problem that really does impair the enjoyment of the viewing experience. In the latter case, sometimes the problem can be mitigated with internal adjustments made by the dealer or vendor service departments, and sometimes the LCD panels or the entire unit need to be replaced.

    Message Edited by all the facts on 09-06-200606:38 AM