UNSOLVED

KR1

updated

22 years ago

K

KR1

19 Posts

0

9992

November 30th, 2004 13:00

1905FP Ultra Sharp

Have new dimension 8400 running XP Pro, ATI X300SE, and 1905FP Monitor.
 
I previously posted a Dell acknowledged problem with the monitor not displaying the anything on the screen when using the DVI cable and pressing F2, F12, F8.
Otherwise the monitor shows in digital very well during start up and while in windows.
 
Have now noted that under the Monitor section in control panel, the monitor shows as "Plug and Play Monitor".  Drivers show Provider as "Microsoft". When I press the Driver Details button it says "No driver files are required or have been loaded".  The Details Tab shows:  Device Instance Id,  then below: Display\DEL 400D\5&20686030&0&  (etc - my entry, numbers just go on and on).
 
Also note on the Dell updates that there are "signed drivers" that I should download, and the MS windows update site also shows there are signed drivers that they recommend to download.
 
Soooooooo  should there be some Monitor specific drivers that should or should have been loaded for this monitor on my system? Are they on the monitor set up disk?? What are these signed drivers?
 
Thanks
  • SR45

    2 Intern

    •

    12138 Posts

    680

    0

    Posted November 30th, 2004 15:00

    My LCD monitor from Dell came with a CD set up disk, with the driver on it.  Inserted the disk, and closed the program when it came on, with the X ( Upper right hand corner ), than went into Display Properties ,  Right Click an empty space on the desktop, Click Properties, Click Settings, Click Advance, Click Monitor on top, Click Properties, Click Driver, than clicked on Update Driver, from the disk that is still in the CD tray. 

    Dim 4400 ( June 2002 )
    2.6 ghz (upgrade from 1.7 ghz)
    768 MB 2100 DDR Memory
    Gainward Ti 4200 128 MB Nvidia
    XP Home plus SP-2
    17 inch Dell LCD monitor (1703 FP)
    48 X CDRW 

     

     

    Message Edited by SR45 on 11-30-2004 11:15 AM

  • KR1

    19 Posts

    680

    0

    Posted November 30th, 2004 16:00

    OK, so should I load the drivers that came on the Monitor disk? 

    Why didnt Dell load them since they came with the computer and no instructions to do load anything in the set up instructions?

    Just want to be sure as not a computer expert and dont want any problems. Will my current settings change if I load the monitor driver? If any problems will the Plug and Play setting (current) still be available to go back to?

    Thanks

  • snaider

    92 Posts

    680

    0

    Posted November 30th, 2004 17:00

    The monitor drivers are almost never loaded since most will work fine as Plug and Play.
     
    I agree it is something they should do since they know it was ordered with the PC, but most likely during assembly your PC is being built and a label is slapped on a monitor box somewhere else.
     
    When testing the machine the Plug and Play monitor will allow the tech to turn on the box without having to know which monitor will utilmatley be used.
     
    Just my 2 cents and I could be completely wrong.
  • SR45

    2 Intern

    •

    12138 Posts

    680

    0

    Posted November 30th, 2004 18:00

    The monitor driver will not change the resolution, it will just update the monitor from microsofts Plug and Play driver's to the proper drivers for that monitor.  Driver's change all the time, and we have to go thru the upgrade path every few months for one thing or another.  Get your self a good book on computers, such as Computer For Dummies, Windows XP For Dummies at your local book store.  Wealth of information if you are starting out.  Other magazines, such as PC World, PC Mag and the like also give good information.  I read these books and many more prior to the first purchase of a system.  Many do not, thinking that plugging it in and everything will be fine really does not work and people get frustrated to high heaven. 
  • VCraig

    2 Intern

    •

    2106 Posts

    680

    0

    Posted December 3rd, 2004 02:00

    In addition to the magazines SR45 suggested, another choice would be Smart Computing (previously PC Novice). Prior to buying my first computer in 1993, then-PC Novice magazine was a great source for information presented at a level I could understand. SR45's advice to bone up on everything computer is good advice.