
Solved!
Go to SolutionVostro 1510 flashing num lock light
Our Vostro 1510 looks like it's powered up, minus any display. The power light is on, as well as the CAPS lock light, scroll lock light, and the NUM lock light is flashing. I can't seem to find anything that explains what that light configuration is telling me. Anyone have any suggestions?
Thanks!
Responses (38)
Solutions (0)
My sister-in-law has the same exact symptoms on her Vostro 1510. The charging cable is not providing power to the laptop or charging the battery, so it won't boot. From the research I've done, it could be a bad motherboard, power interface where the cable plugs in, and many others. I'm hoping someone has had this diagnosed and fixed, and care share the solution with us.
That worked for me as well! I opened the access panels on the bottom, took out the RAM, reversed the two cards, and put them back in. I also took out the hard drive, and put that back in, but I'm sure it was re-seating the RAM that did it. I guess it had nothing to do with the battery or the charging system. My sister-in-law was getting ready to buy a new laptop, but this saved her lots of money. I hope others can benefit from this simple solution! I found this website very helpful for pictures of how to gain access to the Vostro 1510 parts:
http://www.insidemylaptop.com/take-apart-dell-vostro-1510-notebook/
AngelGarrasi
1 Message
17951
0
Posted January 10th, 2012 05:00
Yes! It worked for me! Removed and switched the RAM chips
Thnks!
captaintex
1 Message
17949
0
Posted January 16th, 2012 17:00
Yes, a RAM problem for me as well: one of the two modules is not working anymore. Once removed, the system is ok!!!
Thanks alot!
Abhijeet Garg
4 Posts
17946
0
Posted April 4th, 2012 23:00
My laptop having same problem and resteeing the RAM didint worked for me.
If anyone had any solution.Please Share. :(
DELL-Roshan L
6 Operator
•
4433 Posts
3852
0
Posted April 5th, 2012 02:00
Hi Abhijeet Garg,
Welcome to the Community,
If the system has 2 RAM modules,try booting system with one module at a time.Try the same module on both the slots.
If you could post your system model and status of the Num lock,Caps lock,Scroll lock key that would help to isolate the point of failure.
Thank You
Roshan.

Slam555
1 Rookie
•
3 Posts
17951
0
Posted April 16th, 2011 10:00
I simply removed the RAM and re-installed. Google the process for step by step how to and pictures.