UNSOLVED

ugguru

updated

22 years ago

Closed

U

ugguru

11 Posts

0

18547

June 2nd, 2004 18:00

Step-by-step procedure to install video card

Hello Guys & Dolls,

I just received my ATI Mobility Radeon 9000 64 MD video card. This will replace the current ATI Mobility Radeon 7500 16 MD video card in my Inspiron 5100.

I have already prepared my 5100 for install of this card, by upgrading the BIOS from A6 to A22, and then up to A29. Also, I have increased my RAM from 256 MB to 1 GB. The appropriate driver for this card has also been downloaded and is ready for install. I have set the "Memory usage" to "Programs" instead of "System cache" as was suggested in the documentation provided with the driver download.

My question, since this my first attempt to install a video card,...what is the exact order of operations that I must perform?

My assumptions are the following:

1 - Uninstall the existing ATI driver

2 - Reboot laptop

3 - Install the new Driver (ATI Catalyst 4.5)

4 - Remove 7500 card

5 - Install 9000 card

6 - Reboot (here I am also assuming that XP will see the new card and ask for driver location)

Please correct me and offer any advice as you see fit. Thanks.

Alan

  • ugguru

    11 Posts

    1629

    0

    Posted June 2nd, 2004 18:00

    Sorry folks, that should 64 MB & 16 MB instead of 64 MD & 16 MD.

    Alan

  • HALO PRO

    2 Intern

    •

    357 Posts

    1729

    0

    Posted June 2nd, 2004 21:00

    The regular ATi catalysts will NOT work on a laptop card. But the dell ones are WAY old. So get the catalyst 4.5's from www.omegacorner.com.  They are based on the latest ATi ones, but will work with your card. Besides that i'd say your doing it all right.
  • HALO PRO

    2 Intern

    •

    357 Posts

    1729

    0

    Posted June 2nd, 2004 22:00

    After uninstalling the old drivers, just shut down and put the card in then. Windows Should start up normally. Then once windows is started, do the install of the latest omega catalyst. Sorry for not mentioning earlier, but if you already installed it, and are having any problems, just try reinstalling the drivers first!

    Message Edited by HALO PRO on 06-02-2004 07:45 PM

  • ugguru

    11 Posts

    1729

    0

    Posted June 2nd, 2004 22:00

    Hi HALO PRO,

    Thanks again for your assistance with my video card issue. I also am experiencing another problem. It is as follows:

    I'm running IE6.0 on a Dell Inspiron 5100, Bios A29, P4, 2.4 ghz, 1 GB RAM, and XP Pro OS. When I open IE and click on any of the menu links (Home, Refresh, Back, Exit, etc.), I receive the following error dialog:

    --------------------------------------------------------------------------

    A runtime error has occurred.

    Do you wish to debug?

    Line: 719

    Error: The callee (server [not server applivation] is not available and disappeared; all connections are invalid. The call did not execute.

                                           Yes          No

    ----------------------------------------------------------------------------

    When I click on "N0" the page continues to load without incident. This occurrs everytime I click on any IE menu item. However, the page does load correctly. This obviously is a nuisance for every page that I wish to load. I have installed the two following Java applications, each at a different time and they had no effect on the error I am receiving. The files are:

    j2re-1_4_2_04-windows-i586-p.exe

    and

    j2re-1_3_1_08-windows-i586.exe

    Any advice will be greatly appreciated. Thanks.

    Alan

  • ugguru

    11 Posts

    1729

    0

    Posted June 2nd, 2004 22:00

    Thanks for the driver update. I'm downloading it now.

    Alan

  • HALO PRO

    2 Intern

    •

    357 Posts

    1729

    0

    Posted June 2nd, 2004 23:00

    Sorry, but i don't know what would be causing that, but you could start a new thread, that is only about that problem. And then wait for someone else to answer you.
  • ugguru

    11 Posts

    1729

    0

    Posted June 2nd, 2004 23:00

    Thanks, I posted it on the ExtremeTech.com website forum. However, you may be able to answer this one last question. The quote below is from the omega driver help document.

    "In Windows 2k/XP, ALWAYS disable DDC in the ATI "Displays/Monitor" CP after
       installing drivers to be able to use ALL the refresh rates and resolutions
       your monitor supports, also this is the best way to avoid the 60Hz RR bug."

    How is this performed? I went into the control panel and looked at every tab and there is nothing indicating that "DDC" can be enabled/disabled. Thanks.

    Alan

  • HALO PRO

    2 Intern

    •

    357 Posts

    1729

    0

    Posted June 3rd, 2004 00:00

    It's only for monitors that can use a higher refresh rate. 60Hz is the most a DELL laptop can do, so it doesn't matter, if you do it. So I just wouldn't worry about it.
  • HALO PRO

    2 Intern

    •

    357 Posts

    346

    0

    Posted June 3rd, 2004 03:00

    Sorry I can't answer that one
  • ugguru

    11 Posts

    1729

    0

    Posted June 3rd, 2004 03:00

    Well, I got everything installed and running. However, I am a bit confused??? I went into my "System Information" > "System Summary" > "Display" and I get the following list of data. It indicates that I only have 32.00 MB of Adapter RAM. The card I supposedly received from Dell, was an ATI Radeon Mobility 9000, 5150, 64 MB. Why do I only show 32 MB? Thanks for any comments about this.

    Alan

    Name RADEON Mobility 9000/9200 (Omega 2.5.44)
    PNP Device ID PCI\VEN_1002&DEV_4C66&SUBSYS_01491028&REV_01\4&3839C141&0&0008
    Adapter Type MOBILITY RADEON 9000 AGP (0x4C66), ATI Technologies Inc. (Omega 2.5.44) compatible
    Adapter Description RADEON Mobility 9000/9200 (Omega 2.5.44)
    Adapter RAM 32.00 MB (33,554,432 bytes)
    Installed Drivers ati2dvag.dll
    Driver Version 6.14.10.6444
    INF File oem21.inf (ati2mtag_M9 section)
    Color Planes 1
    Color Table Entries 4294967296
    Resolution 1024 x 768 x 60 hertz
    Bits/Pixel 32
    Memory Address 0xE8000000-0xEFFFFFFF
    I/O Port 0x0000C000-0x0000CFFF
    Memory Address 0xFCFF0000-0xFCFFFFFF
    IRQ Channel IRQ 11
    I/O Port 0x000003B0-0x000003BB
    I/O Port 0x000003C0-0x000003DF
    Memory Address 0xA0000-0xBFFFF
    Driver c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6444, 712.00 KB (729,088 bytes), 4/13/2004 7:42 AM)