UNSOLVED

djgaillimh

updated

22 years ago

Closed

0

8624

September 28th, 2004 20:00

More resolution problems, i9100

Hi,

Recently purchased the i9100 with the MR9700 and have encountered some issues with changing the resolution for games and other applications.

I noticed the posts regarding the 'black borders' issue however I appear to be having the opposite problem.

My native resolution is 1680x1050 but when I load up a game the only supported resolution I can use is 1024x768. (1680x1050 is rarely supported)

If I attempt to change this to any higher res the image becomes too big for the screen and I am unable to locate any option either physically on the notebook or within the display properties to make these resolutions 'fit'.

Scaling is enabled in my Display options and Fn+F7/F8 have no effect.

Has anyone else encountered this and found a working fix or is this just another problem that Dell/ATI are going to ignore?

Any help you can offer would be greatly appreciated.

 

  • cking32

    155 Posts

    223

    0

    Posted September 29th, 2004 12:00

    What drivers are you using, and is the image so big the screen scrolls. What resolutions are you trying that this is happening
  • 223

    0

    Posted October 4th, 2004 12:00

    Hi,

    Thanks for the reply, and apologies for the delay in responding. Unavoidable.

    Anyway yes the screen scrolls on the desktop when one of the offending resolutions is used, though not in games where it is just stationary and scrolling the mouse has no effect.

    On the desktop any resolution other than 1680x1050 (native resolution) and 800x600 cause this problem while in other applications any resolution other than the aforementioned and 1024x768 present problems.

    I'm using the 4.9 cats from ati, modded for laptop use. However this issue was evident with the 4.9betas, 4.8, and the stock drivers that came with the machine, whatever they were.

    I'm not sure if this is actually a problem in the sense that the laptop is working as specified, however it would be nice to be able to change res without this occuring.

    Any ideas?

    Thanks in advance

    Message Edited by djgaillimh on 10-04-2004 08:43 AM

  • cking32

    155 Posts

    223

    0

    Posted October 4th, 2004 16:00

    Ok, quick review, Your screen's native rez is 1680x1050, and you are using 4.9 catalyst drivers. Your games run fine at 1024x768 but when you go above that you get scrolling.

    Ok first lets start with a limitation of all ATI cards: No ATI Radeon card can scale a image above 1280x1024 to panel size except the new Radeon 9800 mobility. With that knowledge my suspect is that the resolutions you are trying to use are not standard resolutions for the 16x10 ratio that the dell monitors run at. I noticed when using the omega drivers for my 9600 pro turbo that i had several resolutions that scrolled and only a few that didn't.

    So i guess what i am saying is what video drivers specifically are you using. and what resolutions specifically cause this scrolling..

    The resolutions you would want to run stuff at are 1680x1050WSXGA, 1440x1050 SXGA, 1200x800 WXGA, 1024x768 XGA resolutions. Any others are none standard and probably are best not used. The screen will generally make you scroll based on settings in the drivers if i remember correctly from stuff i read on omegacorner

  • 223

    0

    Posted October 4th, 2004 19:00

    Quote

    No ATI Radeon card can scale a image above 1280x1024 to panel size except the new Radeon 9800 mobility.

     

    Yeah this is what I suspected. Its a shame, I would have expected a software solution for this but I guess there isnt one.

    Suppose I'll have to wait for a 9800 to be able to use different resolutions, but no matter!

    Thanks for your help though, I appreciate it.