
UNSOLVED
Closed
making a inspiron 3800 fit into a latitude port replicator
Hi i upgraded the bios in my inspiron 3800 to fit my latitude port replicator while my latitude c640 is out of action .have replaced the inspiron bios with the latitude cpxj bios .....and it works great :)............ see link below for how to do it
http://home.comcast.net/~stonent/itol.htm
handy information for all the inspiron users
http://home.comcast.net/~stonent/itol.htm
handy information for all the inspiron users
Responses (4)
Solutions (0)
- Hi is the D dock expansion station made for you particular laptop ?i used the latitude bios of the same motherboard being latitude to make my inspiron work so iff you can find the brother of your inspiron you can put that bios in
see the link below
http://home.comcast.net/~stonent/itol.htm
it explains how to do it ....but your model isnt in there if you know of a latitude motherboard that is the same ..just has different bios it wil work
good luck .....pitty there is no email address he seems to know a lot ! picksupport
3 Posts
246
0
Posted August 2nd, 2005 21:00
Its pretty bad that Dell aren't helping with 8500 and D/Dock, especially when their own sales literature states that they are compatible (see www.dell.com/downloads/global/products/latit/undock_and_go.pdf ). Its bad enough that I bought a notebook that Dell consigned to obscurity within weeks, do they have to rub my nose in it now by refusing to offfer any support for it?
I have logged a support request, but have not even had the courtesy of a reply.I regularly replace my notebook on a three year cycle. I have had a couple of Dells now. The 7000 was solid but for the hinge problem, and gave good service. The 8500 isn't so good, and may well be my last Dell.For anyone else who has been duped into buying incompatible hardware by Dells misleading sales literature, there is a workaround which appears to be working for me. Mileage may vary - use at your own risk - and far from an ideal solution, but whatever ...Hot docking just isn't going to happen. Even cold docking is a no-no - you will hit the BIOS lock. But there is a way to trick the BIOS (I'm using A08). Hibernate your notebook. Sit in onto the dock, but don't latch it down. Press the power button. Wait for the notebook to run through the BIOS, then while it restarts Windows from hibernation press down to latch the notebook. When Windows appears you will be docked. I haven't tested the PCI port, but I've been happily using my 8500 like this for a couple of weeks with no problems, with the DVD in the dock and working, a second monitor attached, networking through the docks ethernet port and a mouse working through the PS/2 port. Main problem is if your notebook goes into standby it will object to the dock when it wakes - undock, let it wake, hibernate and do the trick again.Hope this helps someone. Dell won't.Message Edited by picksupport on 08-03-2005 12:20 AM
- At last ,someone with the same probs as me,I have been going thro DELL-HE_L with Dell UK,having loaded the new A08 Bios.When you read the release notes they claim to have given you "HOT-UNDOCKING" capabilities,with mention of this in previous notes(A06) you assume that Dell could not make this same mistake over 3 times and claiming improvements each time over the last (NON-EXISTENT) Enhancement!! Dell finally came back to me the other day to tell me I could not get any "DOCKING" enhancements on the 8500! But you've noticed these abnormalities aswell.If you check out the Dell site they mention the 8500 being compatible with the "DOCKING STATIONS" and "HOT UNDOCK and GO" but only if you trawl the USA site ????? I use my 8500 with a 23" HP monitor on DVI (as the laptop has no DVI plug) but can only use my "APR" as the station will lock.BUT I will give your suggestion a go this weekend and let you know if it works.Many thanx for your intuative answer,maybe someone reading this can tell us which BIOS the 8500 needs to be able to go onto a DOCKING STATION ???? Here's hoping.

DINK UK
16 Posts
246
0
Posted March 2nd, 2005 18:00
Anyone out there know why after upgrading to the A06 BIOS from the A02 on my Inspiron 8500 I do not have the "Hot Undocking" capabilities as suggested in the BIOS Release notes.I should have this on Page 5 of my system setup,but I only have info regarding the 2 battery compartments?
The other question I have is: After reading "gerardvg" s article on playing with the BIOS versions to get the D/Dock to work is there any way to get the "D/Dock Expansion Station" to work on my Inspiron 8500,as I have a new Expansion Station but only my Advanced Port Replicator(APR) seems to work, when I "DOCK" it gives me "Invalid Port Replicator".This would be great as I can then use the "PCI SLOT".I've tried asking DELL but as yet 2 days and no answer to either,DELL UK couldn't be less helpful so I'm hoping someone out there understands or could point me in the right direction.