
UNSOLVED
Closed
Inspiron doesn't always wake up from standby
Inspiron 600m, XP Home, lots of power. Closing the lid puts it into standby but maybe one out of four times nothing happens when the lid is opened. The same thing happens when I use Start>turn off computer>standby. I would appreciate a few clues about this and what to do about it. Seems like many others are having standby problems as well. Is Dell avoiding doing something about this?
Responses (19)
Solutions (0)
- Hmm... I actually have the exact same problem but in the last few days it has been somewhat solved (by not running that software). Try doing the selective start that I suggested in my last message and see what happens. I even did complete clean install of my HDD but that didn't solve things too.
I just found a link that someone with a inspiron 6000 replaced his motherboard and the problem went away. I am thinking of calling Dell. - I am facing the same issue. Do you use Trillian as an instant messenger?
I could narrow down the problem to the crash regularly happening on my laptop when Trillian is running. I never go into standby with Trillian running now and that has stopped those strange hangs as one wakes up the computer.
On a general note, if this does not help, do as follows Start->Run>type "msconfig" and press enter. Do a selective startup and deselect "start up" items and see if the problem persists.
Hope this helps! - Interesting! Dell replaced the motherboard in my Inspiron 600m to cure aproblem with the touchpad and that is when the startup problem began. I also phoned Dell and a lady from India sent me instructions to do a PC Restore and other steps leading up to that. I did the others but nothing changed and I will do a PC Restore when I figure out how to follow the instructions for backing up the OE files. I will also look into the selective start route you offered. One other thing, I have done an XP Home repair and that was also to no avail.
- Also suffering from this problem, I have norton in the system bar always too. Frequently requires doing a forced hard reboot. As nothing appears on the screen, or closing the lid waiting a while then opening again then pressing the power button to try get it out of stand by. Sometimes works, bit annoying though.
- Have same problem. Thought I had fixed it by updating my version of Dell Quickset, but this was short-lived and the standby issue returned within a day or two. I too have had the problem happen when everything was closed, except McAfee antivirus software I suppose.I have now completely reinstalled Windows, on Dell's advice, but this has not fixed the problem either. Dell are now advising that standby problems are often related to software, and recommend monitoring the issue without any third party software running. So maybe I can at least identify which program is causing the issue. But then what? A laptop is a tool, not an accessory; I need to run stuff on it, otherwise what's the point??Getting frustrated, and thinking about switching standby mode to 'never' just so I don't have to deal with the issue anymore.
- The test I just performed was to leave both IE and OE running and connected to my broadband server, plus a photo program. It went to sleep and woke up about 15 minutes later and encyclo's message popped up all by itself. Standby wasn't always working before even when no programs were running. I shall see. If this keeps up I will switch back to Selective Starts (all) and see if the problem comes back.
- That is good to hear. I would like to see, which program is the culprit for you Carl. :)
I called Dell again and they routed me to their "exclusive" software support and they said that this is clearly a driver issue!! And routed me back to hardware. I think the problem with Dell is not their Indian customer agents but it is their system-- the process is what needs repair. I tried what encyclo suggested: Run>msconfig>switched from selective start to normal. Wowie!! I have had maybe 4 successful recoveries from standby--no programs running. Next, I will leave one or two running and then cycle standby and see what happens.
Carleff

carleff
42 Posts
1281
0
Posted February 5th, 2006 18:00
Hello cyclo, thanks for the response. I have never heard of Trillian. To clarify my problem: The standby issue happens even when I don't have anything showing but a desktop when I go to standby, i.e. no programs running at all. Well, Norton is always there in the background but not checking anything.
carleff