
UNSOLVED
Closed
Impressions of 9100 performance and a clock rate question
I have had the 9100 now for a few days and I'm very impressed. The video performance is very impressive. I'm running Call of Duty at 1024x768 with 4X Anti-Aliasing, 4X Anisotrpic Filtering, character tectures at high and general textures at high and it is silky smooth.
I'm running the Omega 2.5.36b drivers (cat 4.4) and they work great with every game I have thrown at them. Call of Duty was crashing on the Dell drivers.
It looks like Dell is running the 9700 core at 391.5 MHz and memory at 263.25 MHz. It would appear that Dell might be running the core at the low end of the recommended range from ATI. According to AnandTech the 9700 could be implemented at a core of 390 MHz to 450 MHz: http://www.anandtech.com/mobile/showdoc.html?i=1957&p=2 . AnandTech thought that ATI's aim was to run core at 450 MHz. Does anyone know why Dell is running the core at "only" 391.5? Does anyone know what Alienware is running their M51 9700 core at? I wonder if there might be some head room on the core and if the cooling would be adequate. The 9100 seems very well cooled. It does not get near as hot as my 8100 (with Geforce 4 Go).
Thanks!
Message Edited by flipcody on 04-30-2004 02:26 PM
Responses (8)
Solutions (0)
flashrider
7 Posts
362
0
Posted May 1st, 2004 02:00
Hmmm. I just got my Inspiron XPS and the powerstrip on mine says 445 for the core and 263 for memory. They should be the same. What did you use to get your reading?caboosemoose
240 Posts
362
0
Posted May 1st, 2004 09:00
Our Inspiron 9100 review box was clocked at 445MHz core.Very odd. I'm using RadLinker which comes with the Omega drviers. How did you guys figure out what speed it yours was clocked at?
I tried Powerstrip as well and it is listed as 391 and 263.
Both Powerstip and RadLinker list it as a Mobility 9600 but I imagine this is because the 9700 is a new card. What is the 9600 clocked at?
Message Edited by flipcody on 05-01-2004 10:03 PM
Message Edited by flipcody on 05-01-2004 10:04 PM
flashrider
7 Posts
362
0
Posted May 2nd, 2004 02:00
I was using powerstrip to get my gpu clock rate of 445. I won't be suprised if the 9100 had a down clocked 9700. The cards should physically be the same but the clock rate is different in the 9100 BIOS vs. the XPS BIOS. As far as the 9600 clock speeds not sure of the answer on that one...Message Edited by flashrider on 05-01-2004 10:52 PM
- I just upped the clock to 445 and played Call of Duty for 15 minites and the GPU temperature only went up to 52 degrees C! At rest the GPU is running at 42C (at 445). I'm blown away by how well cooled the 9100 is. I wonder why Dell only had the 9700 at 390 on my 9100? Can anyone else with a recently bought 9100 comment on their clock speeds?

Higney85
146 Posts
362
0
Posted April 30th, 2004 19:00