
UNSOLVED
Closed
Flaky Inspiron 8000 ZIF socket
I have a second hand Inspiron 8000 that seems to have a flaky CPU ZIF socket.
If I take press down and push toward the top of the socket while I turn the latch, it'll start up for me and run like normal for a while.
Then it'll stop working again. (Press the power button and the three keyboard status lights come on solid for about 3 second and turn back off)
I've searched the message boards and done all the troubleshooting that I can. I have even totally taken the entire laptop apart.
Does anyone know how to fix the ZIF socket so I don't have to keep taking this thing apart all the time? Taking the keyboard off after almost every reboot to re-seat the CPU is getting tiring, and I don't like the idea of paying $135 to $200 to get another motherboard on eBay that might have the same problem.
Thanks!
Noel
If I take press down and push toward the top of the socket while I turn the latch, it'll start up for me and run like normal for a while.
Then it'll stop working again. (Press the power button and the three keyboard status lights come on solid for about 3 second and turn back off)
I've searched the message boards and done all the troubleshooting that I can. I have even totally taken the entire laptop apart.
Does anyone know how to fix the ZIF socket so I don't have to keep taking this thing apart all the time? Taking the keyboard off after almost every reboot to re-seat the CPU is getting tiring, and I don't like the idea of paying $135 to $200 to get another motherboard on eBay that might have the same problem.
Thanks!
Noel
Responses (5)
Solutions (0)
- I didn't get it on eBay.
I got it from some one I did some work for. (it has some parts I can use with an older and a lot slower laptop)
What I was saying about eBay is that I don't want to take a chance on a $135 to $190 motherboard that isn't new.
I can get a brand new P4 desktop motherboard for that.
Noel - I have TOTALLY disassembled this laptop. (even as far as to take the mobo out of the bottom of the plastic case)
I have reseated EVERYTHING. (even the BIOS chip)
I've had the keyboard off it to reseat the CPU 3 or 4 times now.
Some times it acts like its going to try to boot up, but the hdd light just stays on.
As far as I can tell, the 3 keyboard lights staying on when you try to turn on the i8k is telling you that it can't detect the CPU. - I remember some 8000s having a cpu socket problem where the lock would come open in shipping. Wonder if your mobo is one.... Other than locking it tightly, no other suggestion. Have you reseated the ram modules? Wild shot but it only takes a minute.

icelemon
14 Posts
327
0
Posted February 24th, 2005 15:00