UNSOLVED

newguy007

updated

23 years ago

Closed

N

newguy007

91 Posts

0

324858

September 3rd, 2003 06:00

D/Port APR - Anyone have any luck?

Same as subject...

Many posts are complaining about lost USB Device connections, Keyboards, Mice, etc. on the D series APR's (D/Port).  This includes the Inspiron M series.

I have found that the problems appear to vanish when you remove the APR (nice, eh?).  Kinda defeats the purpose.

Has anyone exchanged their APR for a working unit?  Possibly a later revision?  I have already downloaded patches, etc., and believe I am current on everything else.

Has anyone tried the D/Dock with an Inspiron M series?

John

600m, 1.6, 1mb ram, Logitech Cordless Keyboard/Mouse, Tohiba PDA, Extigy

  • Karell

    2 Intern

    •

    2544 Posts

    1482

    0

    Posted September 3rd, 2003 18:00

    Newguy,

    Thank you for using the Dell Community Forum.
    With the system docked, try loading the latest version of the Dell system software.
    It can be downloaded from here.
    You have to be running WindowsXP, the system software is not compatible with Win2000.

  • newguy007

    91 Posts

    1482

    0

    Posted September 3rd, 2003 21:00

    Pretty sure I mentioned that I was current on everything.  Thanks, anyway.
  • Karell

    2 Intern

    •

    2544 Posts

    1482

    0

    Posted September 4th, 2003 16:00

    Newguy,

    Another customer mentioned that pulling the ac power from the APR seems to reset it.
    He used that step to solve a problem he was having with the network card on an Inspiron APR.
    You may want to give this a try to see if it helps.
    He unplugged the power cord to the APR for 8 hours.
    He left the system docked with the battery in, and turned off that whole time.
    After that time, he plugged the power back into the APR and booted up the system.
    You may want to try this step at different time intervals.
    30min.
    1Hour.
    5Hours.
    8Hours.

    Just a thought...
  • chibbard1

    3 Posts

    1482

    0

    Posted September 14th, 2003 02:00

    I have an inspiron 500m and my usb ports do not work. I have went through three different port replicators, and they have not worked. The dell support person told me that they won't work for a dell printer. But, which nothing will work through mine. I am sorry, but i wanted it so that i wouldn't have to keep unhooking and hooking it up when i take it with me, and if i keep it, that is exactly what i will have to do. Why even have them for sale if they aren't going to work?
  • Karell

    2 Intern

    •

    2544 Posts

    1482

    0

    Posted September 16th, 2003 14:00

    Chibbard,

    Thank you for using the Dell Community Forum.
    Go into the system bios and disable the Bluetooth or Truemobile wireless devices if you have
    them. If you have both installed, disable them both.
    Then undock the system, blow away the docking profile, reload the latest Dell system software,
    and redock the system to rebuild the docking profile. See if that helps.
    Also make sure you have the latest bios file.
  • vexxed

    4 Posts

    1482

    0

    Posted September 17th, 2003 20:00

    I am also having a problem with my APR on Insp. 8500 (running XP prof.) not recognizing my external PS/2 keyboard (I also use an external PS/2 mouse but it seems to works ok). I deleted the hardware profiile(s), etc. within XP but to no avail. I noticed that the keyboard locks up when the machine first starts its boot-up, with all indicator lights on (Num/Cap/Scroll Lock). Since this is before OS even loads, I am skeptical that it has anything to do with XP. When I unplug and re-plug the keyboard, the APR sees it but it then loses its repeat/delay rate settings.

    When I look in system set-up, it says that "Dock D-Bay" is not active but does not give an option for activating it. I was going to try to load the updated BIOS patch for A02 from the web site but I don't really want to unless this is truly the correct solution (and inadvertantly cause other problems). It sounds like others are having similar problems but there are no clear solutions. Is this just defective hardware/software? I suppose one solution is to abandon the PS/2 keyboard and buy a USB one.

    Any thoughts/suggestions?

  • newguy007

    91 Posts

    1482

    0

    Posted September 17th, 2003 20:00

    I am assuming that you do not have the D/Bay and/or D/Dock.

    Since you do not, the patch (actually a firmware upgrade), will not work.  The program will not find the necessary device(s) to upgrade and abort.

    I also assume that you are experiencing the same problems as many others have.  Currently, I know of no fix.

    Contact Dell Tech Support and let them know of your issues.  Be sure to document everything.

     

  • nedor

    49 Posts

    1484

    0

    Posted September 18th, 2003 13:00

    http://forums.us.dell.com/supportforums/board/message?board.id=insp_apr&message.id=5092 is another link with folks with similar problem and few suggestions to fix the problem, I do not belive any of them is a cure for this disease.

     

    Nedor

  • newguy007

    91 Posts

    871

    0

    Posted September 18th, 2003 20:00

    I also have a Windows CE device (Toshiba) that loses connection on re-docking.  It is not specific to the Axim.

    I am using the port replicator, though I haven't tried using the USB cradle connected to the laptop only (no APR).

    I will try that tonight, though not having an APR is not an option...No APR - This Dell goes back - for what I do, it is a must.

    I have had the problems - regardless of the wireless and/or bluetooth mode.  I don't believe it is related to anything other than the APR's design and resource usage.

  • vikramarul

    10 Posts

    1484

    0

    Posted September 18th, 2003 20:00

    I too got the D/Port APR for my Inspiron 600m. Everything worked fine when I docked the first time except for my Dell Axim. For some reason, the Axim when connected to the APR failed to work and windows was not able to recognize the device. Device manager showed the Axim as an Unknown Device. I was able to fix the problem by uninstalling the device. But this had to be done everytime I synched. I was willing to live that but then when I took my laptop yesterday for work and got back and tried docking it to the APR, all the USB ports on the APR failed. I frantically searhed the Dell Support Forum and updated everything, BIOS, Notebook System Software for my 600m. Once the update was over my notebook USB ports also failed. I tried everything possible from uninstalling the devices in Device Manager, restoring BIOS defaults, System Restore, but the USB ports never worked again. Spent a good 7 hours on the trot. I finally, backed up my data and had to re-install windows. My notebook USB ports work. I have not dared to connect the APR. I called up Dell by they couldn't help apart from telling me to do all that I did.

    This may sound strange but I have a feeling it is problem with the built-in Wireless card. I normally connect using RJ-45 at office, but yesterday I connected using Wireless. I did not turn off the radio when I shut down. So when I got back and docked, all devil's den (Dell does not let you use h***) broke loose. I have not dared to try the APR unless there is some solution. I might return it if there is no resolution in the next few days.

    Somebody at DELL please sort out this mess ASAP. You owe it to your customers.  

    Sys Config:

    Inspiron 600m , 1.4 GHz Pentium-M Centrino, 384MB RAM, 64MB ATI Radeon 9000, 30 GB Hard Drive,  Windows XP Professional