UNSOLVED

randiego2

updated

20 years ago

Closed

R

randiego2

3 Posts

0

17461

September 2nd, 2006 19:00

D600 Broadcom Gigabit setup

I recently wiped the drive of a Latitude D600 and reinstalled Windows XP and all the drivers. Everything seems fine, except I cannot get to the Internet. I installed the most recent driver for the Broadcom 570x Gigabit Intergrated Controller, and everything is working correctly - the machine recognizes the device and reports no trouble.

I ran the Broadcom diagnostics and all the tests report normal, except for 'Gigabit Receive and Transmit', which says the controller is 'not configured to gigabit speed'.

however, the manual says for the controller should be set to 'Auto' for the 'Speed and Duplex' setting, which it is.

When I run 'cmd' and ping google.com, I am getting normal packet return readings. Additonally, the connection 'status' dialog in windows is showing packets coming in, but very slowly.

Has anyone run into this? I know this card was working fine before I wiped the machine.
  • randiego2

    3 Posts

    209

    0

    Posted September 2nd, 2006 23:00

    The speed setting under under "Local Area Connection Status" is 100Mbps. Under the controller properties the 'Speed& Duplex' is set to 'auto'. 
  • Hydralisk00222

    2 Intern

    •

    2440 Posts

    209

    0

    Posted September 2nd, 2006 23:00

    What is the speed set as currently? Go to Network Connections control applet and check the speed for Local Area Connection
  • randiego2

    3 Posts

    209

    0

    Posted September 4th, 2006 23:00

    does anyone know if there's a specific order required to install the drivers? Will this affect the operation of the Controller?
  • 209

    0

    Posted September 11th, 2006 14:00

    Your card is working fine if you can ping google.com by name and get a response. This also means that your IP stack is fine, since it is resolving DNS.

    Your problem is most likely a browser setting. Or maybe some firewall setting that is blocking HTTP? Whatever it is, it isn't the hardware or the drivers.