UNSOLVED

lordgovernor

updated

22 years ago

Closed

0

6289

July 4th, 2004 10:00

Computer start-up problem

Hi all:

This is not a boot but start-up problem with Inspiron 8600.  Namely, when I press the On/Off button the three control lights (NumLock, CapsLock and ScrollLock) come on but they just stay switched on for about ten seconds and the computer then switches itself off.  I don't even make it to the DELL BIOS check screen and I can see or hear no processor activity.  I then try to switch it on again but the same thing happens.  I have to repeat this up to six times before I manage to get a start-up and boot.

Can anyone shed any light on why this happens?

Thanks in advance.

Michael

  • wei chian

    12 Posts

    253

    0

    Posted July 4th, 2004 11:00

    Hi, guy, sorry to hear your problem, anyway, have you actually checked the battery charge status of your computer? Maybe your computer battery is in low charge status. If it is not, then check if the battery is well attached to your computer, coz sometimes, cases like this might happen just because of the battery. Or the battery is in good working condition, then I think the problem is most probably caused by the internal hardware part, whether all hardware like RAM, or HDD, or any other things are loose. If one of these is loose, the com might not work probably. If then, I would suggest you to look for Dell technical support. Don't even try to do it  yourself since it might lead ur com to worse situation and I think if this happened, Dell would not be responsible for it.

    Hope this will help you.

    All the best.

  • parkerti

    610 Posts

    253

    0

    Posted July 5th, 2004 00:00

    Have you tried removing the battery and starting just on A/C adapter? Give that a shot. It sounds as if you may have a motherboard issue or a battery issue.

    Regards,