UNSOLVED

geonap

updated

18 years ago

Closed

G

geonap

16 Posts

0

12312

October 21st, 2008 16:00

9400/E1705, power lit for 4 seconds or powers on, depending on how long it's been off

please read notes!

-

Hello Dell Community.

 

My problem lies in my computer not being able to start. It happened that my computer went black screen while in Windows XP, and I therefore took the power as there were nothing else to do. Then I moved to another location, and there it would not start up.

 

The symptoms when power button is hit:

  • The power button is on for 4 seconds
  • The keyboard icons (scrolllock, capslock and numlock) is on for 4 seconds.
  • No fan is running during these 4 seconds.
  • Nothing on the screen.
  • No system beeps at all.

 

When the 4 seconds has passed, the LED's turns off, and nothing happens. I can try starting again with same results.

 

 

I have tried with reseating the harddrive, the memory and also the intel wireless network. I have NOT tried with CPU og videocard.

 

I have also tried starting it with batterypower only, with AC power only and with a combination.

My battery has low capacity, and therefore the battery LED is blinking 4 red blinks, and 1 green. But hitting the power, it turns off. I dont know what conclusion to draw from that.

 

^this battery shows full but will not turn on with battery.

 

I have no idea what to do now, and wherein the problem lies. The computer is out of warranty, but would still be good enough to operate, if it was functional.

 

In advance, thanks.

Kasper

---

i stole that from Kasper, a previous poster with an issue with a 9300. i have the same issue he has.

 

if the laptop remains off for maybe 10-15 minutes, i haven't tested exact time to be precise.. but it WILL turn on, i get the lights with the function button saying no memory installed.. but there is. i just went into bios, reset, rebooted and it was working kind of. diagnostics passed some things (other than HD cause HD has been removed.)

 

this is the integrated version of the e1705 video card so i'm having trouble finding a good deal on the board.

 

i dont know what else it could be, i hope it's not the board... but anyone have a solution? thanks!

  • dgkpcon

    3597 Posts

    330

    0

    Posted October 21st, 2008 19:00

    Remove the battery,hard drive,optical drive,and memory.

     

    Now hold the power button and fn key down for 10 seconds,what are the scroll lock,num lock,and caps lock lights doing.If they have 3 steady blinks(all 3 lights)-your motherboard is bad.

     

    Dell walked me thru this about 2 -3 months ago when i had problems and replaced my motherboard,video card and CPU.

     

    If all 3 lights do not blink and it is just 1 or 2 of them,or they do not blink at all,i am at a loss as to what is going on.

  • geonap

    16 Posts

    330

    0

    Posted October 21st, 2008 22:00

    thanks for the response.

     

    we took apart the laptop, seems to look like previous tech did not put any or very little thermal paste, we put some and now it's turning on a lot more often. i even connected an old computer with a huge fan and put it directly over, keeping it cool. it is still turning on/off and doing it's weirdthings.

     

    i managed to go from A00 to A09 for bios, same thing though, better diag.. diag passes just fine.

     

    i have taken everything out and still, the error lights are the first light is solid, other two blink, that error == no memory. i've tried 6 different chips of memory in different positions and mixtures.

  • TMcCaine

    262 Posts

    330

    0

    Posted October 22nd, 2008 11:00

    It sounds like your unit over heated and shut down to save itself but is still suffering the after effects of overheating. I have found the thermal paste to be the culprit with this many times over, but unfortunately the boards bus is going to continue to give these intermittent errors until it is replaced.

    I would limit the activity on the computer as the likeliness of getting corrupt date on the system is severely plausible because the systems data transfer reliability is compromised due to the failing bus.

     

    This might be a good time to upgrade and change some components. The price I am finding for a refurbished mainboard for this series is about $220 (part FF055). Without the video card I see them run as low as $169. The video card seems to run around $300 (nVidia 7900gs) and with that you could check on a processor too. However, if funds are the issue it may be fruitless at this point.

     

    I would upgrade given the chance, it would make the repair worth it in the end.

    Message Edited by TMcCaine on 10-22-2008 07:55 AM
  • geonap

    16 Posts

    330

    0

    Posted October 22nd, 2008 16:00

    thanks, i've already placed the order for the board, lets hope it's it. cpu is about ~20 bux on ebay. but i wish it was the cpu and hadnt ordered the board cause i can't return it.