
UNSOLVED
Closed
600M USB HUB Power Surge
Hi, I have 600M, while connecting external HDD which USB powered I have message:
. Defenetely not enough power for that HDD.
I saw some patches on www to cure that, anybody tried ?
Or anybody can suggest how to make it working withoug killing the machine.
Thanks to all
Dai
Responses (9)
Solutions (0)
An externally powered hub still won't fix the problem. Remember, each USB port is spec'd to supply only about 1/2 amp but a hard drive will draw in excess of 1 amp when trying to spin up.
The solution is an ac adaptor plugged into the external hard drive. Power it up first then plug it into the USB port.
- " hmm, why do you think that an externally powered hub draws all it's power from the usb port?? "I don't. Let me back up a minute.There are several varieties of USB hubs: USB1, USB2, unpowered, externally powered to name a few. In the case of an external USB hard drive being powered by any USB port, as I said above, they require 1+ amps to spin up. That's about twice the power any USB port is capable of supplying whether that port is located in the computer or downline on a USB hub.Even externally powered USB hubs have ports that can only safely supply about 1/2 amp or half the required power to spin up an external hard drive. As an example, an externally powered 4-port USB hub should be able to supply 4 X 1/2 amp per port for a total of 2 amps. Obviously, the hub cannot draw this power from the USB port on the computer so it needs an external AC adaptor.So, how do we power a USB-powered external hard drive? Use two USB ports instead of one. In most cases the external hard drive manufacturer supplies cables that will tap into two USB ports or one USB port and one PS2 port so the hard drive gets sufficient power to spin up. As an alternative you can use one USB port AND an external AC adaptor to power the hard drive if the manufacturer includes an external AC adaptor jack in their design (most do).When you use an external AC adaptor to power the external drive, the USB port it's connected to(whether it's on the computer itself or whether it's one of the ports in an external hub, powered or unpowered) is usually only used to transfer data and works in a very low power mode. The AC adaptor supplies the heavy juice.So, to summarize, to safely run almost any external USB drive you either need an AC adaptor for the drive itself PLUS a USB port for the data connection OR you need two USB ports, one for data+power and one for power. Whether the USB ports are located in the computer or on an externally powered USB hub makes no difference.
Thanks, all\
Anybody know wire diagram for HDD, I have 5 contacts goint into HDD enclosure, 2 + 3 , probaby 2 are DC power, anybody know how many Volts. My external HDD is normal 9.5 laptop hardrive.
It works fine with older laptops, probably USB-1, and modern desktop without external power.
Thanks to all
- Got an external pocket USB 60GB HDD and had a problem with power hookup until, we got an external case with dual USB hookups. When we plugged in the 2 leads into the USB slots, it worked! The 2 slots must have the sufficient power for my pocket external. MP.
CompUSA has a 2.5" external USB2 enclosure for $19.95 which has the cables AND an option to attach an external ac adaptor.
www.newegg.com has about thirty more external USB2 enclosure choices but you have to look at the detail to see what types of cables each unit comes with.
If you use a 2.5" notebook drive you can probably squeak by with the dual cable hookup for power (not recommended) but do not try it wih a 3.5" or larger drive unless you want to risk destroying your USB ports.

bacillus
2 Intern
•
14378 Posts
225
0
Posted April 23rd, 2005 09:00