UNSOLVED

StaggerLee

updated

22 years ago

Closed

S

StaggerLee

1 Message

0

5579

January 11th, 2005 18:00

5150 fan problems

hello i have a 5150 and i played games for over a year and no problem but now the fan turns up to over 70 and my pc started to struggle and i cant play any ego shooter anymore without problems.
 
I know that it has to do with the fan because i can play any other game except ego shooters without any problems and the problem starts after about 15min.when the cpu gets hot. I wanted to buy some external cooling systems but other users told me that this dont really work for this kind of problem i have.
I have the I8kfangui and the speedswithxp but they cant fix the problem. I dont understand why i played ego shooters for such a long time without a problem and now this turns up
 
Does anyone know a solution for my problem.
 
PS: sorry for my bad english
  • TomC57

    1 Rookie

    •

    73 Posts

    174

    0

    Posted January 11th, 2005 19:00

    Check out this thread or do a search for 5150 overheating and dust.  It sounds as if you have a heat issue.  Use compressed air to keep radiator fins clear of dust.  This problem has been discussed in alot of detail here on the forum.  Hope this helps.

     

    http://forums.us.dell.com/supportforums/board/message?board.id=insp_general&message.id=155282&query.id=513192#M155282

     
     
     
    Tom
  • bastion31

    15 Posts

    174

    0

    Posted January 14th, 2005 05:00

    Stagger Leee... Now that is a funny name. I know that song :-)
     
    I thought I should share the overheating experience with my 4150. It had me stumped.
    I run SETI which pegs the procesor at 100% but it would also cook the processor at 200 degrees F. I only know this because I use the diefer program to get a lot of stats on the processor and fans.
    A very useful program. The Processor would get up to 200 degrees F then the fans would kick in high and cool it down to about 170 then it would rise again. Didn't know why this was happening. The external vents on the intake an output were clear of any debris.
    My keyboard failed one evening so I removed it and lo and behold there was a chunk of dust blocking the flow of air into the laptop. This thing was like a small mouse. I  work in a Tech Support capacity and resultingly bring my laptop into a lot of various warehouse and very dusty office environments. It all added up. Getting the dust clog out was a matter of using 2 toothpicks to remove large chunks of bunny at a time and a little canned air to remove the remnant debris.
    Booted the laptop (incidentally reseating the keyboard cable fixed the 8 keys that stopped functioning) and started SETI that evening. The laptop never got above 172 degrees F. It's still breathing much better 2 weeks later.
     
    Long and short - the internal fan output has nowhere to flush debris and acts like a vacuum.
     
    Carpe Diem
    -Dave
  • nexstar

    9 Posts

    174

    0

    Posted January 27th, 2005 13:00

    I have had a long drawn out saga with Dell's UK support in trying to pin down the overheating/slowdown problem.  They obviously don't get time to read these forums but it would probably save Dell large sums of money if they did!

    On my 5150, I have had 2 motherboards replaced, 4 graphics cards, a CPU and then finally, on my insistance after reading these forums, they replaced the heatsink and fan.  This cured the problem.

    The heatsink grille at the back looked nice and clean.  This is what the other end looked like!

    http://www.gotadsl.plus.com/wcse/DustyDell.JPG

    This machine is not used in a particularly dusty environment but it will be getting a regular clean out from now on.
     
    The 'thermal dust' issue, as Dell like to call it in their bios release notes, is indeed addressed in their bios upgrades.  I think it is A36 and above which seem to have turned the fan off altogether at lower temps.  I can only imagine that they are thinking that 'no airflow=no dust to get caught up' and 'high airflow=good chance that dust gets blown right through heatsink'.  Therefore, 'slow airflow=lots of clogging up'.  I've stuck with A35 as I'd sooner have the system running cooler and just clean it out regularly.
     
    Thanks to all those who have posted valuable info about this issue!