UNSOLVED

vsaxena

updated

16 years ago

V

vsaxena

34 Posts

0

24780

September 17th, 2010 15:00

XPS 420: Upgrading PSU from 375W to 425W. PC does not Post

I have an XPS420 with the standard 375W PSU. Due to some system instabilities after I added another graphics card to drive 4 monitors, I am upgrading the PSU to the 425W PSU which is also a standard part for the XPS  420. The PSU model number is L425P-00. Part number C921D.

When I turn on the PC after plugging in the new power supply, the PC does not get to POST. There are no beeps. Sometimes the fans come on and the front power button is amber without me turning the power on. I have to hold the power button for four seconds to shut it down. But it never posts. I have upgraded the BIOS to the latest version for this computer. I have some RAM with the lighted LEDs and though the bottom LEDs light up, the top (dancing LEDs) do not light up.

Now the kicker: I am on my THIRD unit from Dell for L425P and none of them post. However, if I plug the old 375W power supply (model L375P-00) in, the computer continues to work as before, but for the occasional instability. I very much doubt that all the three units of L425P that Dell has shipped to me are busted. I think there is something else going on.

The two power supplies are almost identical but for the fact that the 425W has an extra plug to drive a second graphics card. Some of the connectors use the 12V C rail in the 425W supply.  I presume that should not matter.

http://support.dell.com/support/edocs/systems/xps420/en/OM/HTML/parts.htm#wp1472790

BTW, my second graphics card is a PCI card and is not using a separate power connection.

What could be going wrong here? Is there some setting I need to change?

I presume that I can use any of the SATA plugs and one of the two Graphic Card Plugs and the specific connector does not matter. My system is almost spec otherwise and has one DVD Drive and one Hard Drive. I am plugging in five power connectors (2 to the MB, one each to the HD & DVD, and one into the PCI-Express Graphic Card).

I noticed that the L425P PSUs have an LED and a black button at the back. I do not know if they have any significance.   The self-check feature shows a green light so the PSUs indicate they are healthy.

 

 

 

 

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    595

    0

    Posted September 17th, 2010 15:00

    375 to 425 is not very much..  I would have went with a standard MODULAR type ATX power supply at least 550 watts.

    But, why the replacement Dell's do not work???   ONLY install one video card, connect the two motherboard power connectors and video card PCIe power connector and see what happens.  Obviously it won't boot but you should be able to access the BIOS (F2 setup).

     

     

       

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • vsaxena

    34 Posts

    595

    0

    Posted September 17th, 2010 15:00

    Firebird, the BIOS screen does not come on. No beeps nothing. The monitors do not show any signs of life.

    The system works fine when I plug back the old 375W supply with all the four monitors running (but for the instability). So I doubt that the second card is the issue when I replace the PSU.

    What is the probability of three busted power supplies in a row?.

     

     

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    595

    0

    Posted September 17th, 2010 15:00

    Murphy's Law says they can all be bad.  It's a long shot, but that's what it sounds like.  Go with a commercial modular type ATX power supply.  I would get a 550 watt to have "reserve" power.  I have an 850 watt in my home built system and only one video card, but I do use that for my recording studio PC.  The price difference for a "good quality" 550 watt is not that much different and they are all the same physical size.

     

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • vsaxena

    34 Posts

    595

    0

    Posted September 17th, 2010 16:00

    BTW, I figured out that the 425W has a self-diagnostic feature. When I press the black button, the light turns green so the PSU self-diag seems to indicate nothing wrong.

    The PC booted up fine when I plugged back the 375W PSU.

    fireberd: Dell PSUs are supposed to have very good continuous power ratings so  I do not think an after-market 550W is going to be very different from the Dell 425W.