UNSOLVED

seeny

updated

19 years ago

S

seeny

223 Posts

0

16310

March 21st, 2008 14:00

xps 420 sigam and sp1 problems

i've tried sp1 on my xps 420 and all seemed ok until i played some music and notice that may subwoofer wasn't working in fact the whole surround sound was gone, tried downloading the sigma drivers but that didn't work :-(

 

is there a fix for this, i searched the forum but can't find a fix

  • GrillR

    1 Message

    734

    0

    Posted March 21st, 2008 17:00

    According to Microsoft KB948343, if seems you shouldn't install Vista SP1 if you have any of the following SigmaTel drivers installed:

     

    • For x86-based computers: Sthda.sys - version 5.10.5762.0 or earlier

    • For x64-based computers: Sthda64.sys - version 5.10.5762.0 or earlier

    • For x86-based computers: Stwrt.sys - version 6.10.5511.0 or earlier

    • For x64-based computers: Stwrt64.sys - version 6.10.5511.0 or earlier

     

    If you have any of these drivers, it says to update them before installing SP1.  My XPS 410 has Stwrt.sys version 6.10.5343.1 installed, so I can't install SP1 until Dell makes available an updated driver (SigmaTel doesn't provide drivers on their Web site and directs people to the computer manufacturer).  I hope Dell provides the driver soon.

  • seeny

    223 Posts

    734

    0

    Posted March 23rd, 2008 14:00

    i tried sp1 once again but this time did what’s been suggested and that’s go into device manager and uninstalled the sigma sound drivers (didn’t restart) and then ran the sp1 installer, after it was finished i went into the control panel and then into sound and set it to 5.1 surround after that i went into audio centre and set that to 5.1 and enabled the subwoofer and whala surround sound with bass :-)
    the only negative thing i’ve found is my machine seems a little slower starting up but that could just be my imagination
  • dhale

    3 Posts

    734

    0

    Posted March 29th, 2008 19:00

    Not solved, not really. :) Problem is, if you remove the Sigma drivers in order to get SP1, you lose your microphone capability. That's fine if you don't use one, I do.

    Patiently waiting for compatible drivers..................

    Message Edited by dhale on 03-29-2008 03:09 PM
  • seeny

    223 Posts

    734

    0

    Posted March 30th, 2008 12:00



    sorry dhale but your wrong i’ve just tested my pc and the mic works, i’ve recorded from the mic used the speech recognition software all fine, maybe you’re doing something wrong?

    problem solved :-)


  • RUQRU

    44 Posts

    734

    0

    Posted March 30th, 2008 13:00

    I don't think the Sigmatel problem is universal. I installed SP1 on two XPS 420 machines that have the Sigmatel driver version 6.10.0.5511. I used the downloaded multi-language version of SP1. I did not uninstall anything, just ran the SP1 installer. On both machines the sound worked fine after SP1 finished its install.

     

    Yes, the Sigmatel 6.10.0.5511 was still functioning. 

    Message Edited by RUQRU on 03-30-2008 10:29 AM
  • sandavis

    2 Intern

    •

    281 Posts

    734

    0

    Posted March 30th, 2008 14:00

    I also installed Sp1  on a dimension 9200 that had the sigma tel driver 6.10.0.5511 I did not uninstall anything

    Mine works great no problems at all , I don't know if I would have been so brave had I known it removed your previous restore points. I thought I could go back and restore if there were any problems.

     

    Sandavis

  • dhale

    3 Posts

    734

    0

    Posted April 5th, 2008 01:00

    Seeny,

     

    Tried it again and still no microphone. I'm using the front jacks, maybe that's why? The default drivers show the rear jacks, but not the front.

     

    Dave 

  • seeny

    223 Posts

    734

    0

    Posted April 5th, 2008 12:00

    hello m8, i've tested (in fact there the ones i've tested) front mic and speaker sockets and they work, what model pc do you have?

     

    my pc is a xps 420 and is about 3months old 

  • dhale

    3 Posts

    734

    0

    Posted April 5th, 2008 13:00

    XPS420 - 6 weeks old

    13 in 1 Card reader

    and that useless Xcelerator (probably the issue)

     

    After deleting the drivers, rebooting, letting the new (default) drivers install, I go to the Sound portion of the Control Panel and there is no recording device. Go figure. Guess I'll wait for the Sigmatel driver update. 

  • seeny

    223 Posts

    174

    0

    Posted April 5th, 2008 16:00

    sounds like my machine except i don't have the Xcelerator