UNSOLVED

Des7

updated

21 years ago

D

Des7

3 Posts

0

10466

October 11th, 2005 17:00

which part is broken here?

My brother tipped over my 8200 tower and now some piece of hardware is broken.  When I start it up it beeps once (saying it passed the POST even though it really didn't) and I get a message saying:
 
Dell system Dimension 8200
www.dell.com
Alert! Previous attempts at booting this system have failed at checkpoint [Poke]. For help in resolving this problem, please note this checkpoint and contact Dell Technical Support.
 
Since the back lights had the Y,Y,G,G code which means it's a memory problem, I tried almost every combination of ram sticks (I have 4 128's and 2 continuinty chips or whatever they call those) I labeled them and tried, 1,2,C,C - 3,4,C,C - 1,3,C,C - 2,4,C,C - 2,4,1,3 and every single time it beeped in this sequence: 5-1-2-3 and didn't show anything on the screen. Then when I tried it back at 1,2,3,4 it gave me that same error but this time said it was the [Hdsk] checkpoint and the error lights on the back of the case changed to G,G,G,Y and Dell says that means "other failure" then I turned it off and on and it went back to the usual Y,Y,G,G error without the beeping and the other checkpoint from before. Then I restarted it and got the beeps but nothing on the screen. How is that even possible?!?! Anyway, after all that and no extra RAM that I know for sure is working to stick in there, how can I determine if it's the RAM, motherboard, or another part that's broken?
oh and needless to say, my DELL warranty is already expired :(
  • arthr

    2 Intern

    •

    265 Posts

    482

    0

    Posted October 11th, 2005 18:00

    If I recall right one beep means it found the monitor. You should get error messages on the screen. Sence you don't you might check youe monitor connection. And/or the video card.
  • Des7

    3 Posts

    482

    0

    Posted October 11th, 2005 19:00

    I already replaced the video card and checked the monitor with another computer :(  too bad RDRAM went extinct cuz I can't find anyone I can borrow some working RAM from to test it and I can't test my RAM in another computer either :( I'm probably going to have to get a probe card sort of thing to test it but I need this computer fixed REALLY FAST
  • goalie28

    104 Posts

    482

    0

    Posted October 11th, 2005 21:00

    I would remove and reseat all PCI cards, the graphics card and the CPU. And beat my brother senseless.

    -goalie28
  • aibling328

    26 Posts

    482

    0

    Posted October 12th, 2005 02:00

    When a computer receives a physical shock like being knocked over, the most likely component to sustain damage is the hard drive.  Especially if it is running.  If it is not running, the HDD can still sustain severe damage.  It is the most delicate component in the computer.

    PC cards, RAM and power connectors can be jarred loose so all these things need to be pulled and reseated.  It isn't likely that the RAM or plug in cards will be damaged in a "tip over."

    There is a very remote possibility that the motherboard has sustained damage from the "tip over," but highly unlikely.

    I would suggest you get another hard drive and stick it in the box in place of the existing hard drive.  It seems to be the only option you have at the present time.  You've tried about everything else.

    AL

     

     

     

  • arthr

    2 Intern

    •

    265 Posts

    482

    0

    Posted October 12th, 2005 14:00

    The first thing the BIOS looks for is the Video card (single beep). If it's satisfied it will continue looking for other things. Any errors with anything else should show on the screen. The lack of anything on the monitor tells me thereis a problem with the video card or the monitor. You may have lost a part of the video card driver. You may have enough driver for the BIOS to detect but not the part that sends signels to the monitor.
  • Des7

    3 Posts

    482

    0

    Posted October 12th, 2005 21:00

    I did try a completely new, store bought, fully compatible graphics card plus it turns out that my older one does work also.  I got it even more narrowed down now and I know I'm exactly correct this time.  It absolutely has to be either the motherboard, power supply, or hard drive and that list is in most likely to least likely order.  So I have a high bid going for a working 8200 motherboard on ebay and if that doesn't work, it's an expensive mistake but time is too much of a factor right now to sit around and try to find a voltmeter aka battery tester (you'd be surprised how few stores have them and the prices on the ones that do!)
  • shesagordie

    12 Elder

    •

    46017 Posts

    482

    0

    Posted October 13th, 2005 00:00

    desolator144.

    Try testing the power supply by unplugging the 20 pin connector from the motherboard and jumping the Green wire to one of the Black wires, if power supply and/or case/processor fans run, then you know it's good.
     
    If the power supply is working.
    You can test the motherboard by removing all the PCI cards, the video card and memory, disconnect the IDE cables and FD cable, then check
    that the front panel cable is connected to motherboard, with nothing else connected to the case, except the power cable and then power the system on. If you do not get any beep codes or no LEDs in the back, then it would appear that motherboard has died.
     
    Bev.