
UNSOLVED
upgrade XPS 700 PSU from 750 to 1kw
Question"
Has anyone had problems with this upgrade? The 1KW upgrade is an OEM and the 700 had the 1kw as an option. The Tech overview manual wiring voltages, and connector designations for both units look the same but perhaps someone has done this and encountered problems.
thanx
Responses (12)
Solutions (0)
MoneyGuyBK
2 Intern
•
2294 Posts
439
0
Posted March 11th, 2008 20:00
I haven't done it, almost did when I bought my 710, however due to issues returned it and got a 720 with 1KW PSU....
However, I know people that HAVE done the exchange with no issues, maybe some of them will chime in soon! Good Luck.
Peace
@woburn wrote:
thanx, thats whats great about schematics or a manual, however Dell does not like to part with info. In the end persistance paid off
the pinouts of the plugs and connection points to the mb are in the manual...
Pinouts
http://support.dell.com/support/edocs/systems/xps700/en/SM_en/techov.htm#wp1060771
System board
http://support.dell.com/support/edocs/systems/xps700/en/SM_en/techov.htm#wp1063887
I did this to my system without any problem. When I got the new upgraded motherboard I had the Dell technician install the new power supply as well. Everything works well, I have dual nVidia 8800GTX cards, so I wanted to connect them without jury rigging my old power supply. The only problem I ran into is the 1kw power supply has a different power cord, which I was not told at the time I ordered the unit. I had to reorder the cord separately. I was a little miffed because at the time of the original order, I clearly stated I was upgrading from the stock 750 w supply, so I would have thought they knew I needed a new cord as well.
To All:
As I am new to this site I was unaware of the Mobo upgrade offered some time ago, and as such was not able to take advantage of it. I have the stock Mobo that shipped with the 700. With the exception of several "signal name" designations ( voltages are the same) I do not see any variance in the pinout specs. Is this going to be a problem? Thank you for your input

Davet50
6 Operator
•
14442 Posts
439
0
Posted March 11th, 2008 20:00
I know someone has done this on a 720 and i really don't see any issues poping up..all the connections are the same and the only difference is the wattage of the supplies..should be a piece of cake..just make sure you note where all the conncetor on the old one are plugged into